[PATCH v9 3/5] ARM: tegra: split setting of CPU reset handler

Mark Rutland mark.rutland at arm.com
Mon Oct 28 20:18:59 EDT 2013


On Mon, Oct 28, 2013 at 10:28:36AM +0000, Alexandre Courbot wrote:
> Not all Tegra devices can set the CPU reset handler in the same way.
> In particular, devices using a TrustZone secure monitor cannot set the
> reset handler directly and need to do it through a firmware operation.
> 
> This patch separates the act of setting the reset handler from its
> preparation, so the former can be implemented in a different way.
> 
> Signed-off-by: Alexandre Courbot <acourbot at nvidia.com>
> Reviewed-by: Tomasz Figa <t.figa at samsung.com>
> Reviewed-by: Stephen Warren <swarren at nvidia.com>
> ---
>  arch/arm/mach-tegra/reset.c | 27 +++++++++++++++++----------
>  1 file changed, 17 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
> index fd0bbf8..e282395 100644
> --- a/arch/arm/mach-tegra/reset.c
> +++ b/arch/arm/mach-tegra/reset.c
> @@ -33,26 +33,18 @@
>  
>  static bool is_enabled;
>  
> -static void __init tegra_cpu_reset_handler_enable(void)
> +static void __init tegra_cpu_reset_handler_set(const u32 reset_address)
>  {
> -	void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
>  	void __iomem *evp_cpu_reset =
>  		IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE + 0x100);
>  	void __iomem *sb_ctrl = IO_ADDRESS(TEGRA_SB_BASE);
>  	u32 reg;
>  
> -	BUG_ON(is_enabled);
> -	BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE);
> -
> -	memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start,
> -			tegra_cpu_reset_handler_size);
> -
>  	/*
>  	 * NOTE: This must be the one and only write to the EVP CPU reset
>  	 *       vector in the entire system.
>  	 */
> -	writel(TEGRA_IRAM_RESET_BASE + tegra_cpu_reset_handler_offset,
> -			evp_cpu_reset);
> +	writel(reset_address, evp_cpu_reset);
>  	wmb();
>  	reg = readl(evp_cpu_reset);
>  
> @@ -66,6 +58,21 @@ static void __init tegra_cpu_reset_handler_enable(void)
>  		writel(reg, sb_ctrl);
>  		wmb();
>  	}
> +}
> +
> +static void __init tegra_cpu_reset_handler_enable(void)
> +{
> +	void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
> +	const u32 reset_address = TEGRA_IRAM_RESET_BASE +
> +						tegra_cpu_reset_handler_offset;
> +
> +	BUG_ON(is_enabled);
> +	BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE);
> +
> +	memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start,
> +			tegra_cpu_reset_handler_size);

A memcpy to iomem seems suspect. Should this be memcpy_toio, or is the __iomem
annotation misleading?

Thanks,
Mark.



More information about the linux-arm-kernel mailing list