[PATCH 1/2] mmc: arasan: Add driver for Arasan SDHCI

[Tomasz Figa]

On Monday 28 of October 2013 14:47:38 Sören Brinkmann wrote:
> On Mon, Oct 28, 2013 at 10:16:49PM +0100, Tomasz Figa wrote:
> > Hi Soren,
> > 
> > On Tuesday 15 of October 2013 12:08:04 Soren Brinkmann wrote:
> > > Add a driver for Arasan's SDHCI controller core.
> > > 
> > > Signed-off-by: Soren Brinkmann <soren.brinkmann at xilinx.com>
> > > ---
> > > 
> > >  .../devicetree/bindings/mmc/arasan,sdhci.txt       |  23 +++
> > >  MAINTAINERS                                        |   1 +
> > >  drivers/mmc/host/Kconfig                           |  12 ++
> > >  drivers/mmc/host/Makefile                          |   1 +
> > >  drivers/mmc/host/sdhci-of-arasan.c                 | 224
> > > 
> > > +++++++++++++++++++++ 5 files changed, 261 insertions(+)
> > > 
> > >  create mode 100644
> > > 
> > > Documentation/devicetree/bindings/mmc/arasan,sdhci.txt create mode
> > > 100644 drivers/mmc/host/sdhci-of-arasan.c
> > > 
> > > diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> > > b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt new file
> > > mode
> > > 100644
> > > index 000000000000..20f0fc25e270
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> > > @@ -0,0 +1,23 @@
> > > +Device Tree Bindings for the Arasan SDCHI Controller
> > > +
> > > +  The bindings follow the mmc[1] and the clock bindings[2]. Only
> > > deviations are +  documented here.
> > > +
> > > +  [1] Documentation/devicetree/bindings/mmc/mmc.txt
> > > +  [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
> > > +
> > 
> > > +Required Properties:
> > According to the example below, the list of required properties lacks
> > interrupt-related properties.
> 
> Well, the interrupt bindings seem to differ between platforms and
> architecture and looking at documentation for other sdhci bindings it
> seemed to be okay to avoid documenting them in this place.

Sure, but I believe that this controller always has an interrupt signal, 
so at least it should be marked that interrupts need to be specified.

Best regards,
Tomasz