[PATCH v6 4/8] ARM: dts: imx27 pinctrl

[Markus Pargmann]

Pinctrl driver node and pin group definitions for other driver nodes.

Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
Acked-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/boot/dts/imx27.dtsi | 102 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)

diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index b7a1c6d..641a63d 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "imx27-pinfunc.h"
 
 / {
 	aliases {
@@ -235,6 +236,12 @@
 				status = "disabled";
 			};
 
+			iomuxc: iomuxc at 10015000 {
+				compatible = "fsl,imx27-iomuxc";
+				reg = <0x10015000 0x600>;
+
+			};
+
 			gpio1: gpio at 10015000 {
 				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 				reg = <0x10015000 0x100>;
@@ -467,3 +474,98 @@
 		};
 	};
 };
+
+&iomuxc {
+	fec {
+		pinctrl_fec1_1: fec1-1 {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+	};
+
+	i2c {
+		pinctrl_i2c1_1: i2c1-1 {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA 0x0
+				MX27_PAD_I2C_CLK__I2C_CLK 0x0
+			>;
+		};
+
+		pinctrl_i2c2_1: i2c2-1 {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+	};
+
+	owire {
+		pinctrl_owire1_1: owire1-1 {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE 0x0
+			>;
+		};
+	};
+
+	uart {
+		pinctrl_uart1_1: uart1-1 {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+			>;
+		};
+
+		pinctrl_uart1_rtscts_1: uart1-rtscts-1 {
+			fsl,pins = <
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart2_1: uart2-1 {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD 0x0
+				MX27_PAD_UART2_RXD__UART2_RXD 0x0
+			>;
+		};
+
+		pinctrl_uart2_rtscts_1: uart2-rtscts-1 {
+			fsl,pins = <
+				MX27_PAD_UART2_CTS__UART2_CTS 0x0
+				MX27_PAD_UART2_RTS__UART2_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart3_1: uart3-1 {
+			fsl,pins = <
+				MX27_PAD_UART3_TXD__UART3_TXD 0x0
+				MX27_PAD_UART3_RXD__UART3_RXD 0x0
+			>;
+		};
+
+		pinctrl_uart3_rtscts_1: uart3-rtscts-1 {
+			fsl,pins = <
+				MX27_PAD_UART3_CTS__UART3_CTS 0x0
+				MX27_PAD_UART3_RTS__UART3_RTS 0x0
+			>;
+		};
+	};
+};
-- 
1.8.4.rc3