[PATCH v7] arm: use built-in byte swap function
Nicolas Pitre
nico at fluxnic.net
Sat Oct 26 22:41:34 EDT 2013
On Thu, 23 May 2013, Kim Phillips wrote:
> Enable the compiler intrinsic for byte swapping on arch ARM. This
> allows the compiler to detect and be able to optimize out byte
> swappings, and has a very modest benefit on vmlinux size (Linaro gcc
> 4.8):
>
> text data bss dec hex filename
> 2840310 123932 61960 3026202 2e2d1a vmlinux-lart #orig
> 2840152 123932 61960 3026044 2e2c7c vmlinux-lart #builtin-bswap
>
> 6473120 314840 5616016 12403976 bd4508 vmlinux-mxs #orig
> 6472586 314848 5616016 12403450 bd42fa vmlinux-mxs #builtin-bswap
>
> 7419872 318372 379556 8117800 7bde28 vmlinux-imx_v6_v7 #orig
> 7419170 318364 379556 8117090 7bdb62 vmlinux-imx_v6_v7 #builtin-bswap
>
> Signed-off-by: Kim Phillips <kim.phillips at freescale.com>
> Reviewed-by: Nicolas Pitre <nico at linaro.org>
> Acked-by: David Woodhouse <David.Woodhouse at intel.com>
Did this ever go somewhere?
Russell suggested at the time to base it against a mainline kernel
(since it was patching files which apparently were already patched with
out-of-tree lz4 patches) and send it to his patch system.
> ---
> resending as v6 appears to have fallen though the cracks. Russell?
>
> v7: rebased onto next-20130521, re-ran above vmlinux sizes with
> Linaro gcc 4.8, added Nicolas' Reviewed-by, and David's Acked-by.
> v6 and prior version information:
> https://lkml.org/lkml/2013/2/22/475
>
> arch/arm/Kconfig | 1 +
> arch/arm/boot/compressed/Makefile | 15 +++++++++++----
> arch/arm/kernel/armksyms.c | 4 ++++
> arch/arm/lib/Makefile | 2 +-
> arch/arm/lib/bswapsdi2.S | 36 ++++++++++++++++++++++++++++++++++++
> 5 files changed, 53 insertions(+), 5 deletions(-)
> create mode 100644 arch/arm/lib/bswapsdi2.S
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index a7fc5ea..c2fe04d 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -63,6 +63,7 @@ config ARM
> select OLD_SIGSUSPEND3
> select OLD_SIGACTION
> select HAVE_CONTEXT_TRACKING
> + select ARCH_USE_BUILTIN_BSWAP
> help
> The ARM series is a line of low-power-consumption RISC chip designs
> licensed by ARM Ltd and targeted at embedded applications and
> diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
> index 198a4ad..bd8a176 100644
> --- a/arch/arm/boot/compressed/Makefile
> +++ b/arch/arm/boot/compressed/Makefile
> @@ -112,12 +112,12 @@ endif
>
> targets := vmlinux vmlinux.lds \
> piggy.$(suffix_y) piggy.$(suffix_y).o \
> - lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S \
> - font.o font.c head.o misc.o $(OBJS)
> + lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \
> + bswapsdi2.S font.o font.c head.o misc.o $(OBJS)
>
> # Make sure files are removed during clean
> extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \
> - lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs)
> + lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs)
>
> ifeq ($(CONFIG_FUNCTION_TRACER),y)
> ORIG_CFLAGS := $(KBUILD_CFLAGS)
> @@ -159,6 +159,12 @@ ashldi3 = $(obj)/ashldi3.o
> $(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S
> $(call cmd,shipped)
>
> +# For __bswapsi2, __bswapdi2
> +bswapsdi2 = $(obj)/bswapsdi2.o
> +
> +$(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
> + $(call cmd,shipped)
> +
> # We need to prevent any GOTOFF relocs being used with references
> # to symbols in the .bss section since we cannot relocate them
> # independently from the rest at run time. This can be achieved by
> @@ -180,7 +186,8 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
> fi
>
> $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
> - $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) FORCE
> + $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
> + $(bswapsdi2) FORCE
> @$(check_for_multiple_zreladdr)
> $(call if_changed,ld)
> @$(check_for_bad_syms)
> diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
> index 60d3b73..ba578f7 100644
> --- a/arch/arm/kernel/armksyms.c
> +++ b/arch/arm/kernel/armksyms.c
> @@ -35,6 +35,8 @@ extern void __ucmpdi2(void);
> extern void __udivsi3(void);
> extern void __umodsi3(void);
> extern void __do_div64(void);
> +extern void __bswapsi2(void);
> +extern void __bswapdi2(void);
>
> extern void __aeabi_idiv(void);
> extern void __aeabi_idivmod(void);
> @@ -114,6 +116,8 @@ EXPORT_SYMBOL(__ucmpdi2);
> EXPORT_SYMBOL(__udivsi3);
> EXPORT_SYMBOL(__umodsi3);
> EXPORT_SYMBOL(__do_div64);
> +EXPORT_SYMBOL(__bswapsi2);
> +EXPORT_SYMBOL(__bswapdi2);
>
> #ifdef CONFIG_AEABI
> EXPORT_SYMBOL(__aeabi_idiv);
> diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
> index af72969..5383df7 100644
> --- a/arch/arm/lib/Makefile
> +++ b/arch/arm/lib/Makefile
> @@ -13,7 +13,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \
> ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
> ucmpdi2.o lib1funcs.o div64.o \
> io-readsb.o io-writesb.o io-readsl.o io-writesl.o \
> - call_with_stack.o
> + call_with_stack.o bswapsdi2.o
>
> mmu-y := clear_user.o copy_page.o getuser.o putuser.o
>
> diff --git a/arch/arm/lib/bswapsdi2.S b/arch/arm/lib/bswapsdi2.S
> new file mode 100644
> index 0000000..2ba43a0
> --- /dev/null
> +++ b/arch/arm/lib/bswapsdi2.S
> @@ -0,0 +1,36 @@
> +#include <linux/linkage.h>
> +
> +#if __LINUX_ARM_ARCH__ >= 6
> +ENTRY(__bswapsi2)
> + rev r0, r0
> + bx lr
> +ENDPROC(__bswapsi2)
> +
> +ENTRY(__bswapdi2)
> + rev r3, r0
> + rev r0, r1
> + mov r1, r3
> + bx lr
> +ENDPROC(__bswapdi2)
> +#else
> +ENTRY(__bswapsi2)
> + eor r3, r0, r0, ror #16
> + mov r3, r3, lsr #8
> + bic r3, r3, #0xff00
> + eor r0, r3, r0, ror #8
> + mov pc, lr
> +ENDPROC(__bswapsi2)
> +
> +ENTRY(__bswapdi2)
> + mov ip, r1
> + eor r3, ip, ip, ror #16
> + eor r1, r0, r0, ror #16
> + mov r1, r1, lsr #8
> + mov r3, r3, lsr #8
> + bic r3, r3, #0xff00
> + bic r1, r1, #0xff00
> + eor r1, r1, r0, ror #8
> + eor r0, r3, ip, ror #8
> + mov pc, lr
> +ENDPROC(__bswapdi2)
> +#endif
> --
> 1.8.1.5
>
More information about the linux-arm-kernel
mailing list