[Add SMP support for Allwinner A20: PATCH V5 1/3] Add smp support for Allwinner A20(sunxi 7i).
Maxime Ripard
maxime.ripard at free-electrons.com
Fri Oct 25 06:25:01 EDT 2013
On Fri, Oct 18, 2013 at 12:37:05AM +0800, Fan Rong wrote:
> This patch adds SMP support for the Allwinner A20 SoC. This SoC uses
> an IP to, among other things, handle the CPU-related configuration,
> like the power clamp, the boot address of the secondary CPUS, etc. We
> thus need to map this IP during the prepare_cpu SMP operation, before
> bringing up the secondary CPU in the secondary_startup operation.
Please wrap this to 80 chars, and use sun7i in your commit title.
>
> Signed-off-by: Fan Rong <cinifr at gmail.com>
> ---
> arch/arm/mach-sunxi/Makefile | 2 +
> arch/arm/mach-sunxi/headsmp.S | 18 +++++++
> arch/arm/mach-sunxi/platsmp.c | 114 ++++++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-sunxi/sunxi.c | 3 ++
> 4 files changed, 137 insertions(+)
> create mode 100644 arch/arm/mach-sunxi/headsmp.S
> create mode 100644 arch/arm/mach-sunxi/platsmp.c
> mode change 100644 => 100755 arch/arm/mach-sunxi/sunxi.c
>
> diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
> index 93bebfc..d7f1ef4 100644
> --- a/arch/arm/mach-sunxi/Makefile
> +++ b/arch/arm/mach-sunxi/Makefile
> @@ -1 +1,3 @@
> obj-$(CONFIG_ARCH_SUNXI) += sunxi.o
> +obj-$(CONFIG_ARCH_SUNXI) += platsmp.o
> +obj-$(CONFIG_ARCH_SUNXI) += headsmp.o
> diff --git a/arch/arm/mach-sunxi/headsmp.S b/arch/arm/mach-sunxi/headsmp.S
> new file mode 100644
> index 0000000..48c9d33
> --- /dev/null
> +++ b/arch/arm/mach-sunxi/headsmp.S
> @@ -0,0 +1,18 @@
> +/*
> + * SMP support for A20
> + *
> + * Copyright (C) 2013 Fan Rong <cinifr at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/linkage.h>
> +#include <linux/init.h>
> +
> +.section ".text.head", "ax"
> +ENTRY(sun7i_secondary_startup)
> + msr cpsr_fsxc,#0xd3
> + b secondary_startup
> +ENDPROC(sun7i_secondary_startup)
> diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c
> new file mode 100644
> index 0000000..fa5adde
> --- /dev/null
> +++ b/arch/arm/mach-sunxi/platsmp.c
> @@ -0,0 +1,114 @@
> +/*
> + * linux/arch/arm/mach-sun7i/platsmp.c
> + *
> + * Copyright (C) 2013 Fan Rong <cinifr at gmail.com>
> + * All Rights Reserved
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#include <linux/init.h>
> +#include <linux/errno.h>
> +#include <linux/smp.h>
> +#include <linux/io.h>
> +#include <linux/delay.h>
> +#include <linux/smp.h>
> +
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +
> +/*
> + * CPU Configure module support
> + * 1: Software reset for smp cpus
> + * 2: Configure for smp cpus including boot.
> + * 3: Three 64-bit idle counters and two 64-bit common counters
> + * it is needed for smp cpus
> + */
> +void __iomem *sun7i_cc_base; /*CPU Configure Base*/
> +extern void sun7i_secondary_startup(void);
> +
> +/*
> + * CPUCFG
> + */
> +#define SUN7I_CPUCFG_BOOTADDR 0x01a4
> +
> +#define SUN7I_CPUCFG_GENCTL 0x0184
> +#define SUN7I_CPUCFG_DBGCTL0 0x01e0
> +#define SUN7I_CPUCFG_DBGCTL1 0x01e4
> +
> +#define SUN7I_CPU1_PWR_CLAMP 0x01b0
> +#define SUN7I_CPU1_PWROFF_REG 0x01b4
> +#define SUN7I_CPUX_RESET_CTL(x) (0x40 + (x)*0x40)
> +
> +static struct of_device_id sun7i_cc_ids[] = {
> + { .compatible = "allwinner,sun7i-a20-cpuconfig"},
> + { /*sentinel*/ }
> +};
> +
> +static int sun7i_boot_secondary(unsigned int cpu, struct task_struct *idle)
> +{
> + long paddr;
> + uint32_t pwr_reg;
> + uint32_t j = 0xff << 1;
> + if (!sun7i_cc_base) {
> + pr_debug("error map cpu configure\n");
> + return -ENOSYS;
> + }
> + /* Set boot addr */
> + paddr = virt_to_phys(sun7i_secondary_startup);
> + writel(paddr, sun7i_cc_base + SUN7I_CPUCFG_BOOTADDR);
> +
> + /* Assert cpu core reset */
> + writel(0, sun7i_cc_base + SUN7I_CPUX_RESET_CTL(cpu));
> +
> + /* Ensure CPU reset also invalidates L1 caches */
> + pwr_reg = readl(sun7i_cc_base + SUN7I_CPUCFG_GENCTL);
> + pwr_reg &= ~BIT(cpu);
> + writel(pwr_reg, sun7i_cc_base + SUN7I_CPUCFG_GENCTL);
> +
> + /* DBGPWRDUP hold low */
> + pwr_reg = readl(sun7i_cc_base + SUN7I_CPUCFG_DBGCTL1);
> + pwr_reg &= ~BIT(cpu);
> + writel(pwr_reg, sun7i_cc_base + SUN7I_CPUCFG_DBGCTL1);
> +
> + /* Ramp up power to CPU1 */
> + do {
> + writel(j, sun7i_cc_base + SUN7I_CPU1_PWR_CLAMP);
> + j = j >> 1;
> + } while (j != 0);
In your first version, you were starting by writing 0xff, while here the
first iteration of the loop writes (0xff << 1), is that intentionnal ?
Maybe you could move the j variable affectation just before the loop so
that we can more easily spot such mistakes.
> +
> + mdelay(10);
> +
> + pwr_reg = readl(sun7i_cc_base + SUN7I_CPU1_PWROFF_REG);
> + pwr_reg &= ~1;
> + writel(pwr_reg, sun7i_cc_base + SUN7I_CPU1_PWROFF_REG);
> + mdelay(1);
> +
> + /* Release CPU reset */
> + writel(3, sun7i_cc_base + SUN7I_CPUX_RESET_CTL(cpu));
> +
> + /* Unlock CPU */
> + pwr_reg = readl(sun7i_cc_base + SUN7I_CPUCFG_DBGCTL1);
> + pwr_reg |= BIT(cpu);
> + writel(pwr_reg, sun7i_cc_base + SUN7I_CPUCFG_DBGCTL1);
> +
> + return 0;
> +}
> +
> +static void __init sun7i_init_cpuconfig_map(unsigned int max_cpus)
> +{
> + struct device_node *np;
Add a new line here.
> + np = of_find_matching_node(NULL, sun7i_cc_ids);
> + if (WARN(!np, "unable to setup cup configure"))
^ cpu
> + return;
Add a new line here.
> + sun7i_cc_base = of_iomap(np, 0);
> + if (WARN(!sun7i_cc_base, "failed to map cup configure base address"))
^ cpu
> + return;
I think I would panic here instead of issuing a warning.
> +}
> +
> +struct smp_operations sun7i_smp_ops __initdata = {
> + .smp_boot_secondary = sun7i_boot_secondary,
> + .smp_prepare_cpus = sun7i_init_cpuconfig_map,
> +};
> diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
> old mode 100644
> new mode 100755
> index f184f6c..545269d
> --- a/arch/arm/mach-sunxi/sunxi.c
> +++ b/arch/arm/mach-sunxi/sunxi.c
> @@ -26,6 +26,8 @@
> #include <asm/mach/map.h>
> #include <asm/system_misc.h>
>
> +extern struct smp_operations sun7i_smp_ops;
> +
> #define SUN4I_WATCHDOG_CTRL_REG 0x00
> #define SUN4I_WATCHDOG_CTRL_RESTART BIT(0)
> #define SUN4I_WATCHDOG_MODE_REG 0x04
> @@ -155,6 +157,7 @@ static const char * const sun7i_board_dt_compat[] = {
> };
>
> DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
> + .smp = smp_ops(sun7i_smp_ops),
Please align it with the other affectations.
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131025/2df2cb5a/attachment.sig>
More information about the linux-arm-kernel
mailing list