[PATCH 3/3] ARM: OMAP2: omap4-sdp: remove unneeded gpios from dss-common

[Tomi Valkeinen]

DISPLAY_SEL_GPIO and DLP_POWER_ON_GPIO are now handled in the .dts file,
so we can remove them from dss-common.c.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---
 arch/arm/mach-omap2/dss-common.c | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index bf89eff..cc70cf9 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -113,9 +113,6 @@ void __init omap4_panda_display_init_of(void)
 
 /* OMAP4 Blaze display data */
 
-#define DISPLAY_SEL_GPIO	59	/* LCD2/PicoDLP switch */
-#define DLP_POWER_ON_GPIO	40
-
 static struct panel_dsicm_platform_data dsi1_panel = {
 	.name		= "lcd",
 	.source		= "dsi.0",
@@ -185,26 +182,8 @@ static struct omap_dss_board_info sdp4430_dss_data = {
 	.default_display_name = "lcd",
 };
 
-/*
- * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO.
- * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails
- * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is
- * selected by default
- */
 void __init omap_4430sdp_display_init_of(void)
 {
-	int r;
-
-	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
-			"display_sel");
-	if (r)
-		pr_err("%s: Could not get display_sel GPIO\n", __func__);
-
-	r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
-		"DLP POWER ON");
-	if (r)
-		pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
-
 	omap_display_init(&sdp4430_dss_data);
 
 	platform_device_register(&sdp4430_lcd_device);
-- 
1.8.1.2