[PATCH 1/3] ARM: OMAP4: use CLK_SET_RATE_PARENT for dss_dss_clk

[Tero Kristo]

On 10/24/2013 04:28 PM, Tony Lindgren wrote:
> * Tero Kristo <t-kristo at ti.com> [131024 06:23]:
>> On 10/24/2013 11:03 AM, Tomi Valkeinen wrote:
>>> Hi Tony, Tero,
>>>
>>> On 09/10/13 16:12, Tomi Valkeinen wrote:
>>>> Set CLK_SET_RATE_PARENT flag for dss_dss_clk so that the DSS's fclk can
>>>> be configured without the need to get the parent of the fclk.
>>>>
>>>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
>>>> ---
>>>>   arch/arm/mach-omap2/cclock44xx_data.c | 3 ++-
>>>>   1 file changed, 2 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
>>>> index b237950..ec0dc0b 100644
>>>> --- a/arch/arm/mach-omap2/cclock44xx_data.c
>>>> +++ b/arch/arm/mach-omap2/cclock44xx_data.c
>>>> @@ -830,7 +830,8 @@ DEFINE_CLK_GATE(dss_tv_clk, "extalt_clkin_ck", &extalt_clkin_ck, 0x0,
>>>>   		OMAP4430_CM_DSS_DSS_CLKCTRL,
>>>>   		OMAP4430_OPTFCLKEN_TV_CLK_SHIFT, 0x0, NULL);
>>>>
>>>> -DEFINE_CLK_GATE(dss_dss_clk, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck, 0x0,
>>>> +DEFINE_CLK_GATE(dss_dss_clk, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck,
>>>> +		CLK_SET_RATE_PARENT,
>>>>   		OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_OPTFCLKEN_DSSCLK_SHIFT,
>>>>   		0x0, NULL);
>>>
>>> I was discussing with Tero about these three patches, and he was ok with
>>> them being merged.
>>>
>>> Tony, it'd be great to have these for 3.13, so that I can start cleaning
>>> up the DSS driver's fclk management.
>>
>> Yea, am ok with these, I can incorporate the changes to my DT clk series.
>
> OK. If you have fixes that should go in earlier, please put those into
> a separate branch.

This is for Paul I guess, I meant I will do the changes needed for the 
DT series to get same fixes there.

-Tero