[PATCH] spi: spi-imx: only enable the clocks when we start to transfer a message
Huang Shijie
b32955 at freescale.com
Wed Oct 23 04:31:50 EDT 2013
Current code keeps the clocks enabled all the time, it wastes the power
when there is no operaiton on the spi controller.
In order to save the power, this patch adds the two hooks:
spi_imx_prepare_message: enable the clocks for this message
spi_imx_unprepare_message: disable the clocks.
This patch also disables the clocks in the end of the probe.
Signed-off-by: Huang Shijie <b32955 at freescale.com>
---
drivers/spi/spi-imx.c | 33 +++++++++++++++++++++++++++++++++
1 files changed, 33 insertions(+), 0 deletions(-)
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 02d9f46..b80f2f7 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -749,6 +749,35 @@ static void spi_imx_cleanup(struct spi_device *spi)
{
}
+static int
+spi_imx_prepare_message(struct spi_master *master, struct spi_message *msg)
+{
+ struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+ int ret;
+
+ ret = clk_enable(spi_imx->clk_per);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(spi_imx->clk_ipg);
+ if (ret) {
+ clk_disable(spi_imx->clk_per);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int
+spi_imx_unprepare_message(struct spi_master *master, struct spi_message *msg)
+{
+ struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+
+ clk_disable(spi_imx->clk_ipg);
+ clk_disable(spi_imx->clk_per);
+ return 0;
+}
+
static int spi_imx_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -810,6 +839,8 @@ static int spi_imx_probe(struct platform_device *pdev)
spi_imx->bitbang.txrx_bufs = spi_imx_transfer;
spi_imx->bitbang.master->setup = spi_imx_setup;
spi_imx->bitbang.master->cleanup = spi_imx_cleanup;
+ spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message;
+ spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
init_completion(&spi_imx->xfer_done);
@@ -872,6 +903,8 @@ static int spi_imx_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "probed\n");
+ clk_disable(spi_imx->clk_ipg);
+ clk_disable(spi_imx->clk_per);
return ret;
out_clk_put:
--
1.7.2.rc3
More information about the linux-arm-kernel
mailing list