[PATCH 2/7] mmc: sdhci-esdhc-imx: add SDHCI_TRANSFER_MODE read function

[Dong Aisheng]

Used to read out the correct value of SDHCI_TRANSFER_MODE register
for upper layer.

Signed-off-by: Dong Aisheng <b29396 at freescale.com>
---
 drivers/mmc/host/sdhci-esdhc-imx.c |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 461a4c3..2be77e0 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -385,6 +385,22 @@ static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
 		return ret;
 	}
 
+	if (unlikely(reg == SDHCI_TRANSFER_MODE)) {
+		if (esdhc_is_usdhc(imx_data)) {
+			u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
+			ret = m & ESDHC_MIX_CTRL_SDHCI_MASK;
+			/* Swap AC23 bit */
+			if (m & ESDHC_MIX_CTRL_AC23EN) {
+				ret &= ~ESDHC_MIX_CTRL_AC23EN;
+				ret |= SDHCI_TRNS_AUTO_CMD23;
+			}
+		} else {
+			ret = readw(host->ioaddr + SDHCI_TRANSFER_MODE);
+		}
+
+		return ret;
+	}
+
 	return readw(host->ioaddr + reg);
 }
 
-- 
1.7.2.rc3