[PATCH] ARM: dts: Add initial support for cm-fx6

[Shawn Guo]

On Tue, Oct 15, 2013 at 05:49:24PM +0300, Valentin Raevsky wrote:
> Add initial support for cm-fx6 module.
> 
> cm-fx6 is a module based on mx6q SoC with the following features:
> - Up to 4GB of DDR3
> - 1 LCD/DVI output port
> - 1 HDMI output port
> - 2 LVDS LCD ports
> - Gigabit Ethernet
> - Analog Audio
> - CAN
> - SATA
> - NAND
> - PCIE
> 
> This patch allows to boot up the module, configures the serial console,
> the Ethernet adapter and the hearbeat led.
> 
> Signed-off-by: Valentin Raevsky <valentin at compulab.co.il>
> Acked-by: Igor Grinberg <grinberg at compulab.co.il>
> ---
>  arch/arm/boot/dts/cm-fx6.dts |   51 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 arch/arm/boot/dts/cm-fx6.dts

Please name the file with 'imx6q-' prefix, and add dtb target into
arch/arm/boot/dts/Makefile.

> 
> diff --git a/arch/arm/boot/dts/cm-fx6.dts b/arch/arm/boot/dts/cm-fx6.dts
> new file mode 100644
> index 0000000..1080215
> --- /dev/null
> +++ b/arch/arm/boot/dts/cm-fx6.dts
> @@ -0,0 +1,51 @@
> +/*
> + * Copyright 2013 CompuLab Ltd.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "imx6q.dtsi"
> +
> +/ {
> +	model = "CompuLab CM-FX6";
> +	compatible = "compulab,cm-fx6", "fsl,imx6q";
> +
> +	memory {
> +		reg = <0x10000000 0x80000000>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		debug-led {
> +			label = "Heartbeat";
> +			gpios = <&gpio2 31 0>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +};
> +
> +&gpmi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpmi_nand_1>;
> +	status = "okay";
> +};
> +
> +&fec {

Please sort the nodes alphabetically in label names.

Shawn

> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet_1>;
> +	phy-mode = "rgmii";
> +	status = "okay";
> +};
> +
> +&uart4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart4_1>;
> +	status = "okay";
> +};
> -- 
> 1.7.9.5
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel