[PATCHv3][ 06/11] ARM: dts: imx25.dtsi: Add some pinmux pins.

[Denis Carikli]

Uart1, fec, i2c1,esdhc1 and audmux were added.

I also added a label to the iomuxc device node like in:
  7b7d672 ARM i.MX dts: Consistently add labels to devicenodes

Cc: Rob Herring <rob.herring at calxeda.com>
Cc: Pawel Moll <pawel.moll at arm.com>
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: Stephen Warren <swarren at wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree at hellion.org.uk>
Cc: devicetree at vger.kernel.org
Cc: Sascha Hauer <kernel at pengutronix.de>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric Bénard <eric at eukrea.com>
Signed-off-by: Denis Carikli <denis at eukrea.com>
---
ChangeLog v2->v3:
- The pads configurations(NO_PAD_CTL) were fixed.
- The ">;" location in "fsl,pins = <". was made consistent.
---
 arch/arm/boot/dts/imx25.dtsi |  104 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 103 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 5f9879d..6ac4c98 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -174,9 +174,111 @@
 				status = "disabled";
 			};
 
-			iomuxc at 43fac000{
+			iomuxc: iomuxc at 43fac000 {
 				compatible = "fsl,imx25-iomuxc";
 				reg = <0x43fac000 0x4000>;
+
+				audmux {
+					pinctrl_audmux_1: audmuxgrp-1 {
+						fsl,pins = <
+							MX25_PAD_KPP_COL3__AUD5_TXFS 0xe0
+							MX25_PAD_KPP_COL2__AUD5_TXC  0xe0
+							MX25_PAD_KPP_COL1__AUD5_RXD  0xe0
+							MX25_PAD_KPP_COL0__AUD5_TXD  0xe0
+						>;
+					};
+				};
+
+				esdhc1 {
+					pinctrl_esdhc1_1: esdhc1grp-1 {
+						fsl,pins = <
+							MX25_PAD_SD1_CMD__SD1_CMD      0x400000c0
+							MX25_PAD_SD1_CLK__SD1_CLK      0x400000c0
+							MX25_PAD_SD1_DATA0__SD1_DATA0  0x400000c0
+							MX25_PAD_SD1_DATA1__SD1_DATA1  0x400000c0
+							MX25_PAD_SD1_DATA2__SD1_DATA2  0x400000c0
+							MX25_PAD_SD1_DATA3__SD1_DATA3  0x400000c0
+						>;
+					};
+				};
+
+				fec {
+					pinctrl_fec_1: fecgrp-1 {
+						fsl,pins = <
+							MX25_PAD_FEC_MDC__FEC_MDC       0x80000000
+							MX25_PAD_FEC_MDIO__FEC_MDIO     0x400001e0
+							MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
+							MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
+							MX25_PAD_FEC_TX_EN__FEC_TX_EN   0x80000000
+							MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
+							MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
+							MX25_PAD_FEC_RX_DV__FEC_RX_DV   0x80000000
+							MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0
+						>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1_1: i2c1grp-1 {
+						fsl,pins = <
+							MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000
+							MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000
+						>;
+					};
+				};
+
+				lcdc {
+					pinctrl_lcdc_1: lcdcgrp-1 {
+						fsl,pins = <
+							MX25_PAD_LD0__LD0           0x1
+							MX25_PAD_LD1__LD1           0x1
+							MX25_PAD_LD2__LD2           0x1
+							MX25_PAD_LD3__LD3           0x1
+							MX25_PAD_LD4__LD4           0x1
+							MX25_PAD_LD5__LD5           0x1
+							MX25_PAD_LD6__LD6           0x1
+							MX25_PAD_LD7__LD7           0x1
+							MX25_PAD_LD8__LD8           0x1
+							MX25_PAD_LD9__LD9           0x1
+							MX25_PAD_LD10__LD10         0x1
+							MX25_PAD_LD11__LD11         0x1
+							MX25_PAD_LD12__LD12         0x1
+							MX25_PAD_LD13__LD13         0x1
+							MX25_PAD_LD14__LD14         0x1
+							MX25_PAD_LD15__LD15         0x1
+							MX25_PAD_GPIO_E__LD16       0x1
+							MX25_PAD_GPIO_F__LD17       0x1
+
+							MX25_PAD_HSYNC__HSYNC       0x80000000
+							MX25_PAD_VSYNC__VSYNC       0x80000000
+							MX25_PAD_LSCLK__LSCLK       0x80000000
+							MX25_PAD_OE_ACD__OE_ACD     0x80000000
+							MX25_PAD_CONTRAST__CONTRAST 0x80000000
+						>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1_1: uart1grp-1 {
+						fsl,pins = <
+							MX25_PAD_UART1_RTS__UART1_RTS 0xe0
+							MX25_PAD_UART1_CTS__UART1_CTS 0xe0
+							MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+							MX25_PAD_UART1_RXD__UART1_RXD 0xc0
+						>;
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2_1: uart2grp-1 {
+						fsl,pins = <
+							MX25_PAD_UART2_RXD__UART2_RXD 0x80000000
+							MX25_PAD_UART2_TXD__UART2_TXD 0x80000000
+							MX25_PAD_UART2_RTS__UART2_RTS 0x80000000
+							MX25_PAD_UART2_CTS__UART2_CTS 0x80000000
+						>;
+					};
+				};
 			};
 
 			audmux at 43fb0000 {
-- 
1.7.9.5