[PATCH v2 0/4] Exynos 5410 Dual cluster support

[Kevin Hilman]

Aliaksei Katovich <aliaksei.katovich at gmail.com> writes:

> hi Kevin;
>
>> Vyacheslav Tyrtov <v.tyrtov at samsung.com> writes:
>> 
>> > The series of patches represent support of Exynos 5410 SoC
>> >     
>> > The Exynos 5410 is the first Samsung SoC based on bigLITTLE architecture.
>> > Patches allow all 8 CPU cores (4 x A7 and 4 x A15) to run at the same time
>> >     
>> > Patches add new platform description, support of clock controller,
>> > dual cluster support and device tree for Exynos 5410 
>> >    
>> > Has been build on v3.12-rc5.
>> > Has been tested on Exynos 5410 reference board (exynos_defconfig).
>> 
>> Has anyone tried this on the exynos5410 based odroid-xu yet?  
>> 
>> I tried booting this on my recently arrived odroid-xu, but am not
>> getting it to boot.
>
> 	I am able to boot my odroid-xu+e to busybox with these patches applied
> 	against 3.12-rc5: exynos_defconfig and exynos5410-smdk5410.dtb were
> 	used.
>
> 	However there seem to be some issues with virq allocations, like this:

Ah, I've seen the same thing, but for me it doesn't boot reliably.
Sometimes there's an immediate fault like this[1], and once in a rare
while, it starts to boot and I see the same virq errors.

Curious what you guys are using for boot loaders.  I found some
pre-build u-boot binaries along with the necessary BL1/2 binary blobs in
the hardkernel kernel repo: https://github.com/hardkernel/linux.git
branch: origin/odroidxu-3.4.y
path: tools/hardkernel/u-boot-pre-built

Unfortunatly, that u-boot doesn't have usb networking support built in
so I couln't use u-boot to tftp the kernel, so I was able to use fasboot
to load the kernel/ramdisk, but it's very flaky.

Do you have an pointers of where to get a known working bootloader.
Ideally, a u-boot with networking/tftp support would be ideal.

Thanks,

Kevin

[1]
USB cable Connected![0x4]
Starting download of 10008576 bytes
.........
downloading of 10008576 bytes finished
Kernel size: 00296bc5
Ramdisk size: 006f3c00
Booting kernel..
## Booting kernel from Legacy Image at 40008000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2714501 Bytes = 2.6 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
   XIP Kernel Image ... OK
OK 

Starting kernel ...

undefined instruction
pc : [<4000800c>]          lr : [<bfc65df4>]
sp : bfb5bbc8  ip : 00000000     fp : 00001251
r10: 00000000  r9 : 00000000     r8 : bfb5bf30
r7 : 00000000  r6 : 00000000     r5 : 40008000  r4 : bfcabac0
r3 : bfb5bfa8  r2 : 40000100     r1 : 00001251  r0 : 00000000
Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

emmc resetting ...
resetting ...