[RESEND PATCH 3/4] ARM: dts: bcm281xx: Add i2c busses

[Matt Porter]

On Wed, Oct 16, 2013 at 09:32:51PM -0700, Christian Daudt wrote:
> Hi Tim,
>  This patch does not work as it relies on the yet-unmerged clock code
> for bcm11351. This patch does not apply to -rc, and when tweaked it
> does not compile as it references  non-existent bsc_clks.
>  Has the clk patches been submitted yet ? Applying this will have to
> wait until those have been accepted.

Hi Christian, Tim mentioned the dependencies in the cover letter.
Sebastian's series, for which the pull request is already sent, and then
Tim's own fixed clock series that is pending some review.

-Matt

> On Wed, Oct 16, 2013 at 3:01 PM, Tim Kryger <tim.kryger at linaro.org> wrote:
> > Add the DTS nodes for all the i2c busses in the SoC.
> >
> > Signed-off-by: Tim Kryger <tim.kryger at linaro.org>
> > Reviewed-by: Christian Daudt <csd at broadcom.com>
> > Reviewed-by: Matt Porter <matt.porter at linaro.org>
> > Reviewed-by: Markus Mayer <markus.mayer at linaro.org>
> > ---
> >  arch/arm/boot/dts/bcm11351.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 40 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
> > index 1246885..4bfd7e3 100644
> > --- a/arch/arm/boot/dts/bcm11351.dtsi
> > +++ b/arch/arm/boot/dts/bcm11351.dtsi
> > @@ -146,6 +146,46 @@
> >                 status = "disabled";
> >         };
> >
> > +       i2c at 3e016000 {
> > +               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> > +               reg = <0x3e016000 0x80>;
> > +               interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +               clocks = <&bsc1_clk>;
> > +               status = "disabled";
> > +       };
> > +
> > +       i2c at 3e017000 {
> > +               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> > +               reg = <0x3e017000 0x80>;
> > +               interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +               clocks = <&bsc2_clk>;
> > +               status = "disabled";
> > +       };
> > +
> > +       i2c at 3e018000 {
> > +               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> > +               reg = <0x3e018000 0x80>;
> > +               interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +               clocks = <&bsc3_clk>;
> > +               status = "disabled";
> > +       };
> > +
> > +       i2c at 3500d000 {
> > +               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> > +               reg = <0x3500d000 0x80>;
> > +               interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +               clocks = <&pmu_bsc_clk>;
> > +               status = "disabled";
> > +       };
> > +
> >         clocks {
> >                 bsc1_clk: bsc1 {
> >                         compatible = "fixed-clock";
> > --
> > 1.8.0.1
> >
> >
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel