[PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver

[Christian Daudt]

On Thu, Oct 3, 2013 at 5:23 PM, Sherman Yin <syin at broadcom.com> wrote:
> Adds pinctrl driver for Broadcom Capri (BCM281xx) SoCs.
>
> Signed-off-by: Sherman Yin <syin at broadcom.com>
> Reviewed-by: Christian Daudt <bcm at fixthebug.org>
> Reviewed-by: Matt Porter <matt.porter at linaro.org>
> ---
>  arch/arm/mach-bcm/Kconfig       |    2 +
>  drivers/pinctrl/Kconfig         |   10 +
>  drivers/pinctrl/Makefile        |    1 +
>  drivers/pinctrl/pinctrl-capri.c | 1727 +++++++++++++++++++++++++++++++++++++++
>  4 files changed, 1740 insertions(+)
>  create mode 100644 drivers/pinctrl/pinctrl-capri.c
>
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index 69d67f7..2546365 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -10,6 +10,8 @@ config ARCH_BCM
>         select GENERIC_CLOCKEVENTS
>         select GENERIC_TIME
>         select GPIO_BCM
> +       select PINCTRL
> +       select PINCTRL_CAPRI
>         select SPARSE_IRQ
>         select TICK_ONESHOT
>         select CACHE_L2X0

On your subsequent patchset pls move this from Kconfig to
arm/configs/bcm_defconfig, and break that modification into a separate
patch from the drivers/* modification.

 thanks,
   csd