[RESEND PATCH 0/4] Add-Broadcom-Kona-I2C-Support

[Tim Kryger]

This series adds support for the Kona I2C bus found on Broadcom mobile
SoCs like the bcm11351 (aka bcm281xx) and enables it on the bcm28155-ap
board.

It depends upon the following commits:
  https://lkml.org/lkml/2013/10/7/481
  http://www.spinics.net/lists/arm-kernel/msg274964.html

Tim Kryger (4):
  i2c: i2c-bcm-kona: Introduce Broadcom I2C Driver
  i2c: i2c-bcm-kona: Add support for high-speed mode
  ARM: dts: bcm281xx: Add i2c busses
  ARM: dts: bcm28155-ap: Enable all the i2c busses

 .../devicetree/bindings/i2c/i2c-bcm-kona.txt       |  30 +
 arch/arm/boot/dts/bcm11351.dtsi                    |  40 +
 arch/arm/boot/dts/bcm28155-ap.dts                  |  20 +
 drivers/i2c/busses/Kconfig                         |  10 +
 drivers/i2c/busses/Makefile                        |   1 +
 drivers/i2c/busses/i2c-bcm-kona.c                  | 936 +++++++++++++++++++++
 6 files changed, 1037 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt
 create mode 100644 drivers/i2c/busses/i2c-bcm-kona.c

-- 
1.8.0.1