[PATCH 1/2] ARM: AT91: pm: factorize standby function
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Wed Oct 16 10:24:56 EDT 2013
Detect presence of second bank. So we do not need to have on function per SoC
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
---
arch/arm/mach-at91/at91sam9260.c | 2 +-
arch/arm/mach-at91/at91sam9261.c | 2 +-
arch/arm/mach-at91/at91sam9263.c | 2 +-
arch/arm/mach-at91/at91sam9g45.c | 2 +-
arch/arm/mach-at91/at91sam9rl.c | 2 +-
arch/arm/mach-at91/pm.h | 55 ++++++++++++++++++----------------------
6 files changed, 29 insertions(+), 36 deletions(-)
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index ffe9ce7..3b43d56 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -353,7 +353,7 @@ static void __init at91sam9260_initialize(void)
/* Register GPIO subsystem */
at91_gpio_init(at91sam9260_gpio, 3);
- at91_pm_set_standby(at91sam9_standby);
+ at91_pm_set_standby(at91sam9_sdram_standby);
}
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 1edbb6f..a0857c3 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -295,7 +295,7 @@ static void __init at91sam9261_initialize(void)
/* Register GPIO subsystem */
at91_gpio_init(at91sam9261_gpio, 3);
- at91_pm_set_sandby(at91sam9_standby);
+ at91_pm_set_standby(at91sam9_sdram_standby);
}
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 8c81c89..103a95b 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -332,7 +332,7 @@ static void __init at91sam9263_initialize(void)
/* Register GPIO subsystem */
at91_gpio_init(at91sam9263_gpio, 5);
- at91_pm_set_standby(at91sam9263_standby);
+ at91_pm_set_standby(at91sam9_sdram_standby);
}
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 8460f52..f29731e 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -381,7 +381,7 @@ static void __init at91sam9g45_initialize(void)
/* Register GPIO subsystem */
at91_gpio_init(at91sam9g45_gpio, 5);
- at91_pm_set_standby(at91sam9g45_standby);
+ at91_pm_set_standby(at91_ddr_standby);
}
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index c7986e4..9e28f41 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -298,7 +298,7 @@ static void __init at91sam9rl_initialize(void)
/* Register GPIO subsystem */
at91_gpio_init(at91sam9rl_gpio, 4);
- at91_pm_set_standby(at91sam9_standby);
+ at91_pm_set_standby(at91sam9_sdram_standby);
}
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 76dd1a7..3ed190c 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -49,16 +49,18 @@ static inline void at91rm9200_standby(void)
/* We manage both DDRAM/SDRAM controllers, we need more than one value to
* remember.
*/
-static inline void at91sam9g45_standby(void)
+static inline void at91_ddr_standby(void)
{
/* Those two values allow us to delay self-refresh activation
* to the maximum. */
- u32 lpr0, lpr1;
- u32 saved_lpr0, saved_lpr1;
+ u32 lpr0, lpr1 = 0;
+ u32 saved_lpr0, saved_lpr1 = 0;
- saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
- lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
- lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+ if (at91_ramc_base[1]) {
+ saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+ lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+ lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+ }
saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
@@ -66,25 +68,29 @@ static inline void at91sam9g45_standby(void)
/* self-refresh mode now */
at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
- at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
cpu_do_idle();
at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
- at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
}
/* We manage both DDRAM/SDRAM controllers, we need more than one value to
* remember.
*/
-static inline void at91sam9263_standby(void)
+static inline void at91sam9_sdram_standby(void)
{
- u32 lpr0, lpr1;
- u32 saved_lpr0, saved_lpr1;
+ u32 lpr0, lpr1 = 0;
+ u32 saved_lpr0, saved_lpr1 = 0;
- saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
- lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
- lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+ if (at91_ramc_base[1]) {
+ saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
+ lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
+ lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+ }
saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
@@ -92,27 +98,14 @@ static inline void at91sam9263_standby(void)
/* self-refresh mode now */
at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
- at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
cpu_do_idle();
at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
- at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
-}
-
-static inline void at91sam9_standby(void)
-{
- u32 saved_lpr, lpr;
-
- saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
-
- lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
- at91_ramc_write(0, AT91_SDRAMC_LPR, lpr |
- AT91_SDRAMC_LPCB_SELF_REFRESH);
-
- cpu_do_idle();
-
- at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
}
#endif
--
1.8.4.rc3
More information about the linux-arm-kernel
mailing list