[PATCH] at91: serial: add usart3 in separat dtsi

[Nicolas Ferre]

On 16/10/2013 14:14, boris brezillon :
> Hello Jiri,
>
> On 16/10/2013 10:55, Jiri Prchal wrote:
>> This patch adds usart3 for AT91SAM9G25 and X25.
>> Based on sugescion of Nicolas Ferre it's in separated dtsi file included in both
>> g25 and x25 files.
>>
>> Signed-off-by:  <jiri.prchal at aksignal.cz>
>> ---
>>    arch/arm/boot/dts/at91sam9g25.dtsi       |    1 +
>>    arch/arm/boot/dts/at91sam9x25.dtsi       |    1 +
>>    arch/arm/boot/dts/at91sam9x5-usart3.dtsi |   27 +++++++++++++++++++++++++++
>>    3 files changed, 29 insertions(+)
>>    create mode 100644 arch/arm/boot/dts/at91sam9x5-usart3.dtsi
>>
>> diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
>> index b4ec6fe..980e9a7 100644
>> --- a/arch/arm/boot/dts/at91sam9g25.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9g25.dtsi
>> @@ -7,6 +7,7 @@
>>     */
>>
>>    #include "at91sam9x5.dtsi"
>> +#include "at91sam9x5-usart3.dtsi"
>>
>>    / {
>>    	model = "Atmel AT91SAM9G25 SoC";
>> diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
>> index 49e94ab..3ac17ee 100644
>> --- a/arch/arm/boot/dts/at91sam9x25.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9x25.dtsi
>> @@ -7,6 +7,7 @@
>>     */
>>
>>    #include "at91sam9x5.dtsi"
>> +#include "at91sam9x5-usart3.dtsi"
>>
>>    / {
>>    	model = "Atmel AT91SAM9X25 SoC";
>> diff --git a/arch/arm/boot/dts/at91sam9x5-usart3.dtsi b/arch/arm/boot/dts/at91sam9x5-usart3.dtsi
>> new file mode 100644
>> index 0000000..f5b6979
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/at91sam9x5-usart3.dtsi
>> @@ -0,0 +1,27 @@
>> +/*
>> + * at91sam9x5-usert3.dtsi - Device Tree Include file for AT91SAM9G25 or
> typo here : at91sam9x5-usert3.dtsi -> at91sam9x5-usart3.dts.
>
> I won't complain about this, but some at91 dts(i) names already use "_"
> instead of "-":
> - at91sam9g20ek_common.dtsi
> - at91sam9g20ek_2mmc.dts
>
> I personally prefer the hypen version, but I think it's up to Atmel
> maintainers to decide which name sould be used.
>
>> + * AT91SAM9X25 SoC
>> + *
>> + * Copyright (C) 2013 Jiri Prchal <jiri.prchal at aksignal.cz>
>> + *
>> + * Licensed under GPLv2.
>> + */
>> +
>> +/ {
>> +	aliases {
>> +		serial4 = &usart3;
>> +	};
>> +
>> +	ahb {
>> +		apb {
>> +			usart3: serial at f8028000 {
>> +				compatible = "atmel,at91sam9260-usart";
>> +				reg = <0xf8028000 0x200>;
>> +				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&pinctrl_usart3>;
>> +				status = "disabled";
>> +			};
>> +		};
>> +	};
>> +};
> I would have moved the the pinctrl definition in this file too.
> In fact, that's what I did in my patch (
> https://lkml.org/lkml/2013/8/7/252).
>
> Anyway, I'm not sure, but I think Nicolas already applied my patch in
> his at91-3.13-cleanup branch.

Absolutely, this feature is already included in Boris' patch series. You 
can have a look here:

https://github.com/at91linux/linux-at91/commit/d195608acc78db293468694ed5225a39e440429d

> If this is not the case, I'll be pleased to add my Acked-by after you've
> added the pinctrl definitions
> and fixed the the typo.

No need to resend it.

Best regards,
-- 
Nicolas Ferre