[PATCH v2 7/7] arm/dts: added dt properties to adapt to the new phy framwork

[Kishon Vijay Abraham I]

Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation
of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt
and Documentation/devicetree/bindings/phy/ti-phy.txt.

Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
---
 arch/arm/boot/dts/omap5.dtsi |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index edc801f..998f198 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -661,7 +661,8 @@
 				compatible = "snps,dwc3";
 				reg = <0x4a030000 0x10000>;
 				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-				usb-phy = <&usb2_phy>, <&usb3_phy>;
+				phys = <&usb2_phy>, <&usb3_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
 				tx-fifo-resize;
 			};
 		};
@@ -677,6 +678,7 @@
 				compatible = "ti,omap-usb2";
 				reg = <0x4a084000 0x7c>;
 				ctrl-module = <&omap_control_usb2phy>;
+				#phy-cells = <0>;
 			};
 
 			usb3_phy: usb3phy at 4a084400 {
@@ -686,6 +688,7 @@
 				      <0x4a084c00 0x40>;
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 				ctrl-module = <&omap_control_usb3phy>;
+				#phy-cells = <0>;
 			};
 		};
 
-- 
1.7.10.4