[PATCH 2/3] ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix

[Jean-Christophe PLAGNIOL-VILLARD]

On 18:46 Mon 14 Oct     , Nicolas Ferre wrote:
> Change the sha/aes/tdes compatibility string to match common
> case for the at91sam9g45 family which is to keep the at91 prefix.
> 
> Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
> ---
>  arch/arm/boot/dts/sama5d3.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
> index b2aabff..99bd4a6 100644
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi
> @@ -342,19 +342,19 @@
>  			};
>  
>  			sha at f8034000 {
> -				compatible = "atmel,sam9g46-sha";
> +				compatible = "atmel,at91sam9g46-sha";
>  				reg = <0xf8034000 0x100>;
>  				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
>  			};
>  
>  			aes at f8038000 {
> -				compatible = "atmel,sam9g46-aes";
> +				compatible = "atmel,at91sam9g46-aes";
>  				reg = <0xf8038000 0x100>;
>  				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
>  			};
>  
>  			tdes at f803c000 {
> -				compatible = "atmel,sam9g46-tdes";
> +				compatible = "atmel,at91sam9g46-tdes";
>  				reg = <0xf803c000 0x100>;
>  				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
you keep the previous compatible in the driver too for backword compatiblity

Best Regards,
J.
>  			};
> -- 
> 1.8.2.2
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel