[PATCH 05/12] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume

[Marek Vasut]

Dear Peter Chen,

> On Sat, Oct 12, 2013 at 11:42:06AM +0200, Marek Vasut wrote:
> > Dear Peter Chen,
> > 
> > > Add notify_suspend and notify_resume according to different SoCs.
> > > 
> > > Signed-off-by: Peter Chen <peter.chen at freescale.com>
> > > ---
> > > 
> > >  drivers/usb/phy/phy-mxs-usb.c |   73
> > > 
> > > +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 73
> > > insertions(+), 0 deletions(-)
> > > 
> > > diff --git a/drivers/usb/phy/phy-mxs-usb.c
> > > b/drivers/usb/phy/phy-mxs-usb.c index e0b0de0..8661dae 100644
> > > --- a/drivers/usb/phy/phy-mxs-usb.c
> > > +++ b/drivers/usb/phy/phy-mxs-usb.c
> > > @@ -197,6 +197,78 @@ static int mxs_phy_on_disconnect(struct usb_phy
> > > *phy,
> > > 
> > >  	return 0;
> > >  
> > >  }
> > > 
> > > +static int mxs_phy_on_suspend_workaround(struct usb_phy *phy,
> > > +		enum usb_device_speed speed)
> > > +{
> > > +	dev_dbg(phy->dev, "%s speed device has suspended\n",
> > > +		(speed == USB_SPEED_HIGH) ? "high" : "non-high");
> > 
> > HS : FS/LS you mean?
> 
> Yes, it is what I mean.
> OK, I will change to HS and FS/LS.
> 
> > > +/*
> > > + * For mxs PHY, there are two PHY issues related to suspend/resume.
> > > + * For mx23 and mx28, both of two issues are existed.
> > > + * For mx6q and mx6dl, only one issue is existed.
> > > + * For mx6 sololite, none issue is existed.
> > > + */
> > > +static void mxs_phy_workaround(struct mxs_phy *mxs_phy)
> > > +{
> > > +	if (is_mx23_phy(mxs_phy)) {
> > 
> > This is_mx23_phy() returns 1 for mx28 too? It's not too clear, not even
> > from the comment above, a short comment here would help for sure.
> 
> mx23 and mx28 PHY are the same PHY, so the fixes are the same.
> Anything I need to add?

I believe it's OK. But identifying MX28 PHY via is_mx23_phy() might be a little 
confusing. I'm just trying to keep this driver flushed out of my brain here and 
do an unbiased review ;-)

Best regards,
Marek Vasut