[PATCH 1/4] drivers/gpu/drm/tilcdc: don't use devm_pinctrl_get_select_default() in probe

Wolfram Sang wsa at the-dreams.de
Sun Oct 13 12:17:47 EDT 2013


Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for setting the default pins. Compile tested only.

Acked-by: Linus Walleij <linus.walleij at linaro.org> (personally at LCE13)
Signed-off-by: Wolfram Sang <wsa at the-dreams.de>
---
 drivers/gpu/drm/tilcdc/tilcdc_panel.c  | 6 ------
 drivers/gpu/drm/tilcdc/tilcdc_slave.c  | 6 ------
 drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 6 ------
 3 files changed, 18 deletions(-)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_panel.c b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
index 86c6732..f0ff5f8 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_panel.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
@@ -16,7 +16,6 @@
  */
 
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/backlight.h>
 #include <video/display_timing.h>
 #include <video/of_display_timing.h>
@@ -358,7 +357,6 @@ static int panel_probe(struct platform_device *pdev)
 	struct device_node *node = pdev->dev.of_node;
 	struct panel_module *panel_mod;
 	struct tilcdc_module *mod;
-	struct pinctrl *pinctrl;
 	int ret = -EINVAL;
 
 
@@ -376,10 +374,6 @@ static int panel_probe(struct platform_device *pdev)
 
 	tilcdc_module_init(mod, "panel", &panel_module_ops);
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "pins are not configured\n");
-
 
 	panel_mod->timings = of_get_display_timings(node);
 	if (!panel_mod->timings) {
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_slave.c b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
index 595068b..4f3c969 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_slave.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
@@ -17,7 +17,6 @@
 
 #include <linux/i2c.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/consumer.h>
 #include <drm/drm_encoder_slave.h>
 
 #include "tilcdc_drv.h"
@@ -320,7 +319,6 @@ static int slave_probe(struct platform_device *pdev)
 	struct device_node *i2c_node;
 	struct slave_module *slave_mod;
 	struct tilcdc_module *mod;
-	struct pinctrl *pinctrl;
 	uint32_t i2c_phandle;
 	struct i2c_adapter *slavei2c;
 	int ret = -EINVAL;
@@ -366,10 +364,6 @@ static int slave_probe(struct platform_device *pdev)
 
 	tilcdc_module_init(mod, "slave", &slave_module_ops);
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "pins are not configured\n");
-
 	tilcdc_slave_probedefer(false);
 
 	return 0;
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
index c38b56b..20f3d89 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
@@ -19,7 +19,6 @@
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/consumer.h>
 
 #include "tilcdc_drv.h"
 
@@ -326,7 +325,6 @@ static int tfp410_probe(struct platform_device *pdev)
 	struct device_node *i2c_node;
 	struct tfp410_module *tfp410_mod;
 	struct tilcdc_module *mod;
-	struct pinctrl *pinctrl;
 	uint32_t i2c_phandle;
 	int ret = -EINVAL;
 
@@ -344,10 +342,6 @@ static int tfp410_probe(struct platform_device *pdev)
 
 	tilcdc_module_init(mod, "tfp410", &tfp410_module_ops);
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "pins are not configured\n");
-
 	if (of_property_read_u32(node, "i2c", &i2c_phandle)) {
 		dev_err(&pdev->dev, "could not get i2c bus phandle\n");
 		goto fail;
-- 
1.8.4.rc3




More information about the linux-arm-kernel mailing list