[PATCH 3/5] usb: phy: add Broadcom Kona USB control driver
Matt Porter
matt.porter at linaro.org
Fri Oct 11 09:47:59 EDT 2013
On 10/10/2013 11:31 AM, Felipe Balbi wrote:
> Hi,
>
> On Mon, Oct 07, 2013 at 06:12:30AM -0400, Matt Porter wrote:
>> Broadcom BCM281xx parts have a PHY control block that
>> operates in conjunction with the DWC2 USB OTG. This driver
>> exposes an API that allows control of power/reset for a
>> connected USB PHY.
>>
>> Signed-off-by: Matt Porter <matt.porter at linaro.org>
>> Reviewed-by: Markus Mayer <markus.mayer at linaro.org>
>> Reviewed-by: Tim Kryger <tim.kryger at linaro.org>
>> ---
>> .../devicetree/bindings/usb/bcm-kona-usb-ctrl.txt | 12 ++
>> drivers/usb/phy/Kconfig | 5 +
>> drivers/usb/phy/Makefile | 1 +
>> drivers/usb/phy/bcm-kona-usb.h | 31 +++++
>> drivers/usb/phy/phy-bcm-kona-ctrl.c | 151 +++++++++++++++++++++
>> 5 files changed, 200 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/usb/bcm-kona-usb-ctrl.txt
>> create mode 100644 drivers/usb/phy/bcm-kona-usb.h
>> create mode 100644 drivers/usb/phy/phy-bcm-kona-ctrl.c
>>
>> diff --git a/Documentation/devicetree/bindings/usb/bcm-kona-usb-ctrl.txt b/Documentation/devicetree/bindings/usb/bcm-kona-usb-ctrl.txt
>> new file mode 100644
>> index 0000000..98163f6
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/bcm-kona-usb-ctrl.txt
>> @@ -0,0 +1,12 @@
>> +BROADCOM KONA USB CONTROL
>> +
>> +Required properties:
>> + - compatible: brcm,kona-ctrl-usb
>> + - reg: offset and length of the USB control registers
>> +
>> +Example:
>> +
>> + usbctl: usbctl at 3f130000 {
>> + compatible = "brcm,kona-ctrl-usb";
>> + reg = <0x3f130000 0x28>;
>> + };
>> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
>> index d5589f9..2b7b4f1 100644
>> --- a/drivers/usb/phy/Kconfig
>> +++ b/drivers/usb/phy/Kconfig
>> @@ -100,6 +100,11 @@ config AM335X_PHY_USB
>> This driver provides PHY support for that phy which part for the
>> AM335x SoC.
>>
>> +config BCM_KONA_CTRL_USB
>> + tristate
>> + help
>> + Enable this to support the Broadcom Kona USB control block
>> +
>> config SAMSUNG_USBPHY
>> tristate
>> help
>> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
>> index 2135e85..98c545e 100644
>> --- a/drivers/usb/phy/Makefile
>> +++ b/drivers/usb/phy/Makefile
>> @@ -15,6 +15,7 @@ obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o
>> obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o
>> obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o
>> obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o
>> +obj-$(CONFIG_BCM_KONA_CTRL_USB) += phy-bcm-kona-ctrl.o
>> obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
>> obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o
>> obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o
>> diff --git a/drivers/usb/phy/bcm-kona-usb.h b/drivers/usb/phy/bcm-kona-usb.h
>> new file mode 100644
>> index 0000000..4563dd6
>> --- /dev/null
>> +++ b/drivers/usb/phy/bcm-kona-usb.h
>> @@ -0,0 +1,31 @@
>> +/*
>> + * bcm_kona_usb.h -- Broadcom Kona USB header file
>> + *
>> + * Copyright (C) 2013 Linaro Limited
>> + * Matt Porter <matt.porter at linaro.org>
>> + *
>> + * This software is licensed under the terms of the GNU General Public
>> + * License version 2, as published by the Free Software Foundation, and
>> + * may be copied, distributed, and modified under those terms.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef __BCM_KONA_USB_H
>> +#define __BCM_KONA_USB_H
>> +
>> +#include <linux/usb/phy.h>
>> +
>> +struct bcm_kona_usb {
>> + struct usb_phy phy;
>> + struct device *dev;
>> + struct device *ctrl_dev;
>> +};
>> +
>> +extern struct device *bcm_kona_get_ctrl_dev(void);
>> +extern void bcm_kona_ctrl_usb_phy_power(struct device *, int);
>
> looks like a job for extcon fwk.
>
>> diff --git a/drivers/usb/phy/phy-bcm-kona-ctrl.c b/drivers/usb/phy/phy-bcm-kona-ctrl.c
>> new file mode 100644
>> index 0000000..d2936b6
>> --- /dev/null
>> +++ b/drivers/usb/phy/phy-bcm-kona-ctrl.c
>> @@ -0,0 +1,151 @@
>> +/*
>> + * phy-bcm-kona-ctrl.c - Broadcom Kona USB Control Driver
>> + *
>> + * Based on phy-omap-control.c
>> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
>> + * Copyright (C) 2013 Linaro Limited
>> + * Matt Porter <matt.porter at linaro.org>
>> + *
>> + * This software is licensed under the terms of the GNU General Public
>> + * License version 2, as published by the Free Software Foundation, and
>> + * may be copied, distributed, and modified under those terms.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/of.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/clk.h>
>> +
>> +#include "bcm-kona-usb.h"
>> +
>> +#define OTGCTL_OTGSTAT2 (1 << 31)
>> +#define OTGCTL_OTGSTAT1 (1 << 30)
>> +#define OTGCTL_PRST_N_SW (1 << 11)
>> +#define OTGCTL_HRESET_N (1 << 10)
>> +#define OTGCTL_UTMI_LINE_STATE1 (1 << 9)
>> +#define OTGCTL_UTMI_LINE_STATE0 (1 << 8)
>> +
>> +#define P1CTL_SOFT_RESET (1 << 1)
>> +#define P1CTL_NON_DRIVING (1 << 0)
>> +
>> +struct bcm_kona_usb_ctrl_regs {
>> + u32 ctrl;
>> + u32 cfg;
>> + u32 p1ctl;
>> + u32 status;
>> + u32 bc_cfg;
>> + u32 tp_in;
>> + u32 tp_out;
>> + u32 phy_ctrl;
>> + u32 usbreg;
>> + u32 usbproben;
>> +};
>> +
>> +struct bcm_kona_ctrl_usb {
>> + struct device *dev;
>> + struct bcm_kona_usb_ctrl_regs *regs;
>> +};
>> +
>> +static struct bcm_kona_ctrl_usb *ctrl_usb;
>> +
>> +/**
>> + * bcm_kona_ctrl_dev - returns the device pointer for this control device
>> + *
>> + * This API should be called to get the device pointer for the Kona USB
>> + * control device. This device pointer should be used when calling the
>> + * exported bcm_kona_ctrl_usb_phy_power() API.
>> + */
>> +struct device *bcm_kona_get_ctrl_dev(void)
>> +{
>> + if (!ctrl_usb)
>> + return ERR_PTR(-ENODEV);
>> +
>> + return ctrl_usb->dev;
>> +}
>> +EXPORT_SYMBOL_GPL(bcm_kona_get_ctrl_dev);
>
> definitely a job for extcon ;-)
>
>> +void bcm_kona_ctrl_usb_phy_power(struct device *dev, int on)
>> +{
>> + struct bcm_kona_ctrl_usb *ctrl = dev_get_drvdata(dev);
>> + u32 val;
>> +
>> + val = readl(&ctrl->regs->ctrl);
>> + if (on) {
>> + /* Configure and power PHY */
>> + val &= ~(OTGCTL_OTGSTAT2 | OTGCTL_OTGSTAT1 |
>> + OTGCTL_UTMI_LINE_STATE1 | OTGCTL_UTMI_LINE_STATE0);
>> + val |= OTGCTL_PRST_N_SW | OTGCTL_HRESET_N;
>> + writel(val, &ctrl->regs->ctrl);
>> +
>> + /* Soft reset PHY */
>> + val = readl(&ctrl->regs->p1ctl);
>> + val &= ~P1CTL_NON_DRIVING;
>> + val |= P1CTL_SOFT_RESET;
>> + writel(val, &ctrl->regs->p1ctl);
>> + writel(val & ~P1CTL_SOFT_RESET, &ctrl->regs->p1ctl);
>> + /* Reset needs to be asserted for 2ms */
>> + mdelay(2);
>> + writel(val | P1CTL_SOFT_RESET, &ctrl->regs->p1ctl);
>> + } else {
>> + val &= ~(OTGCTL_PRST_N_SW | OTGCTL_HRESET_N);
>> + writel(val, &ctrl->regs->ctrl);
>> + }
>> +}
>> +EXPORT_SYMBOL_GPL(bcm_kona_ctrl_usb_phy_power);
>
> what a hack :-)
:)
> Please use phy->init() and phy->exit() callbacks. In fact, please use
> Kishon's generic PHY layer.
Ok, reworking on top of his series...looks to be straightforward.
Thanks,
Matt
More information about the linux-arm-kernel
mailing list