[PATCH V2 3/4] ARM: tegra: add LP1 support code for Tegra124
Joseph Lo
josephl at nvidia.com
Fri Oct 11 05:58:38 EDT 2013
The LP1 suspend procedure is the same with Tegra30 and Tegra114. Just
need to update the difference of the register address, then we can
continue to share the code.
Signed-off-by: Joseph Lo <josephl at nvidia.com>
---
V2:
* squash from 2/7 to 5/7 in V1
---
arch/arm/mach-tegra/Makefile | 1 +
arch/arm/mach-tegra/flowctrl.c | 2 ++
arch/arm/mach-tegra/iomap.h | 3 +++
arch/arm/mach-tegra/pm.c | 12 +++++++++---
arch/arm/mach-tegra/sleep-tegra30.S | 33 ++++++++++++++++++++++++++++-----
5 files changed, 43 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index de3748e..019bb17 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -36,6 +36,7 @@ ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o
endif
obj-$(CONFIG_ARCH_TEGRA_124_SOC) += sleep-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_124_SOC) += pm-tegra30.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_124_SOC) += cpuidle-tegra114.o
endif
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index 5348543..ce8ab8a 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -87,6 +87,7 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid)
break;
case TEGRA30:
case TEGRA114:
+ case TEGRA124:
/* clear wfe bitmap */
reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
/* clear wfi bitmap */
@@ -125,6 +126,7 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid)
break;
case TEGRA30:
case TEGRA114:
+ case TEGRA124:
/* clear wfe bitmap */
reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
/* clear wfi bitmap */
diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h
index cbee57f..26b1c2a 100644
--- a/arch/arm/mach-tegra/iomap.h
+++ b/arch/arm/mach-tegra/iomap.h
@@ -105,6 +105,9 @@
#define TEGRA_EMC1_BASE 0x7001A800
#define TEGRA_EMC1_SIZE SZ_2K
+#define TEGRA124_EMC_BASE 0x7001B000
+#define TEGRA124_EMC_SIZE SZ_2K
+
#define TEGRA_CSITE_BASE 0x70040000
#define TEGRA_CSITE_SIZE SZ_256K
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 36ed88a..4ae0286 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -59,8 +59,10 @@ static void tegra_tear_down_cpu_init(void)
break;
case TEGRA30:
case TEGRA114:
+ case TEGRA124:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
- IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
+ IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+ IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
tegra_tear_down_cpu = tegra30_tear_down_cpu;
break;
}
@@ -216,8 +218,10 @@ static bool tegra_lp1_iram_hook(void)
break;
case TEGRA30:
case TEGRA114:
+ case TEGRA124:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
- IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
+ IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+ IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
tegra30_lp1_iram_hook();
break;
default:
@@ -244,8 +248,10 @@ static bool tegra_sleep_core_init(void)
break;
case TEGRA30:
case TEGRA114:
+ case TEGRA124:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
- IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
+ IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+ IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
tegra30_sleep_core_init();
break;
default:
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 7c529a1..b16d4a57 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -408,8 +408,12 @@ _pll_m_c_x_done:
cmp r10, #TEGRA30
movweq r0, #:lower16:TEGRA_EMC_BASE @ r0 reserved for emc base
movteq r0, #:upper16:TEGRA_EMC_BASE
- movwne r0, #:lower16:TEGRA_EMC0_BASE
- movtne r0, #:upper16:TEGRA_EMC0_BASE
+ cmp r10, #TEGRA114
+ movweq r0, #:lower16:TEGRA_EMC0_BASE
+ movteq r0, #:upper16:TEGRA_EMC0_BASE
+ cmp r10, #TEGRA124
+ movweq r0, #:lower16:TEGRA124_EMC_BASE
+ movteq r0, #:upper16:TEGRA124_EMC_BASE
exit_self_refresh:
ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL
@@ -556,6 +560,17 @@ tegra114_sdram_pad_address:
.word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30
tegra114_sdram_pad_adress_end:
+tegra124_sdram_pad_address:
+ .word TEGRA124_EMC_BASE + EMC_CFG @0x0
+ .word TEGRA124_EMC_BASE + EMC_ZCAL_INTERVAL @0x4
+ .word TEGRA124_EMC_BASE + EMC_AUTO_CAL_INTERVAL @0x8
+ .word TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL @0xc
+ .word TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
+ .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
+ .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
+ .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
+tegra124_sdram_pad_address_end:
+
tegra30_sdram_pad_size:
.word tegra30_sdram_pad_address_end - tegra30_sdram_pad_address
@@ -700,8 +715,13 @@ tegra30_sdram_self_refresh:
cmp r10, #TEGRA30
adreq r2, tegra30_sdram_pad_address
ldreq r3, tegra30_sdram_pad_size
- adrne r2, tegra114_sdram_pad_address
- ldrne r3, tegra114_sdram_pad_size
+ cmp r10, #TEGRA114
+ adreq r2, tegra114_sdram_pad_address
+ ldreq r3, tegra114_sdram_pad_size
+ cmp r10, #TEGRA124
+ adreq r2, tegra124_sdram_pad_address
+ ldreq r3, tegra30_sdram_pad_size
+
mov r9, #0
padsave:
@@ -719,7 +739,10 @@ padsave_done:
cmp r10, #TEGRA30
ldreq r0, =TEGRA_EMC_BASE @ r0 reserved for emc base addr
- ldrne r0, =TEGRA_EMC0_BASE
+ cmp r10, #TEGRA114
+ ldreq r0, =TEGRA_EMC0_BASE
+ cmp r10, #TEGRA124
+ ldreq r0, =TEGRA124_EMC_BASE
enter_self_refresh:
cmp r10, #TEGRA30
--
1.8.4
More information about the linux-arm-kernel
mailing list