[PATCH 4/6] pinctrl: single: Add support for wake-up interrupts

[Roger Quadros]

On 10/10/2013 07:23 PM, Tony Lindgren wrote:
> * Tony Lindgren <tony at atomide.com> [131010 09:09]:
>> * Roger Quadros <rogerq at ti.com> [131010 06:32]:
>>>
>>> I tried testing this with the USB EHCI driver, but I'm not getting wake up interrupts
>>> while the system is still running and only the EHCI controller is runtime suspended.
>>>
>>> It seems we need to somehow call _reconfigure_io_chain() to update the daisy chain
>>> whenever the pad wakeup_enable bit is changed.
>>
>> Sounds like this is on omap3? Have you tried calling pcs_soc->rearm() in the
>> pcs_irq_handle() like the comments there suggest? At least for me that keeps
>> the wake-up interrupts continuously running on omap3 instead of just idle modes.
>>
>> Now on omap4, I've noticed the wake up interrupts are on all the time based on tests
>> with the serial driver.
> 
> Oh, and if you're runtime suspending EHCI only, and if the EHCI module has
> wake-up registers, it should be able to wake EHCI from retention on it's own
> without a need for the io chain at all.
> 

The problem is that the asynchronous wake up mechanism for USB Host module is broken
in the design so we have to rely on IO daisy chain every time. :(

cheers,
-roger