[PATCH v4 00/17] ARM: at91: move to common clk framework
Boris BREZILLON
b.brezillon at overkiz.com
Fri Oct 11 03:37:44 EDT 2013
Hello,
This patch series is the 4th version of the new at91 clock implementation
(using common clk framework).
Most of the clock provided by the PMC (Power Management Controller) are
implemented :
- main clock (main oscillator)
- pll clocks
- master clock
- programmable clocks
- utmi clock
- peripheral clocks
- system clocks
This implementation is only compatible with device tree definition.
The goal is to define the whole clock tree in the device tree.
Could a dt maintainer take a look at these dt bindinds.
This patch series is based on linus tree (but should apply correctly on
linux-next) and has been tested on sama5d31ek.
Best Regards,
Boris
Changes since v3:
- simplify master clk implementation (drop set_rate/parent support)
- fix bug in set_rate function of pll driver
- fix coding style issues
- define macros and constants where needed
- remove peripheral id macro references
- remove sam9g35 specific handling (sam9g35 = sam9x5)
- rework main clk prepare function to handle automatic rate calculation
Changes since v2:
- fix several bugs in clk implementations
- drop non-dt boards support
- split the series to ease review and tests:
* 1 patch series for new clk implementations (this series)
* 1 patch series to move each at91 SoC to common clk framework (coming soon)
- modify dt-bindings (add atmel,clk- prefix to atmel specific properties)
- add clk macros for dt-bindings
- add pmc framework (helper function to access pmc registers)
- add interrupt support to enable passive wait in clk_prepare functions
Changes since v1:
- fix bugs in pll, programmable and system clock implementations
(wrong bit position).
- add usb clock configuration support (ohci and udc drivers +
clk_lookup for non dt boards)
- rework of the system clock interfaces (no need to define a parent clock,
system clock is a gate with no rate info)
- change system, peripheral and programmable clk dt bindings (1 master node
and multiple child nodes each defining a system/peripheral or prog clock)
- fix bugs in sama5 dt definition
Boris BREZILLON (17):
ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.h
ARM: at91: add Kconfig options for common clk support
clk: at91: add PMC base support
clk: at91: add PMC macro file for dt definitions
clk: at91: add PMC main clock
clk: at91: add PMC pll clocks
clk: at91: add PMC master clock
clk: at91: add PMC system clocks
clk: at91: add PMC peripheral clocks
clk: at91: add peripheral clk macros for peripheral clk dt bindings
clk: at91: add PMC programmable clocks
clk: at91: add PMC utmi clock
clk: at91: add PMC usb clock
clk: at91: add PMC smd clock
clk: at91: add PMC clk device tree binding doc.
ARM: at91: move pit timer to common clk framework
ARM: at91: add new compatible strings for pmc driver
.../devicetree/bindings/clock/at91-clock.txt | 328 ++++++++++++
arch/arm/mach-at91/Kconfig | 44 ++
arch/arm/mach-at91/Kconfig.non_dt | 6 +
arch/arm/mach-at91/Makefile | 2 +-
arch/arm/mach-at91/at91rm9200.c | 2 +-
arch/arm/mach-at91/at91sam9260.c | 2 +-
arch/arm/mach-at91/at91sam9261.c | 2 +-
arch/arm/mach-at91/at91sam9263.c | 2 +-
arch/arm/mach-at91/at91sam926x_time.c | 14 +-
arch/arm/mach-at91/at91sam9g45.c | 2 +-
arch/arm/mach-at91/at91sam9n12.c | 2 +-
arch/arm/mach-at91/at91sam9rl.c | 2 +-
arch/arm/mach-at91/at91sam9x5.c | 2 +-
arch/arm/mach-at91/clock.c | 7 +-
arch/arm/mach-at91/generic.h | 3 +-
arch/arm/mach-at91/pm.c | 2 +-
arch/arm/mach-at91/pm_slowclock.S | 2 +-
arch/arm/mach-at91/sama5d3.c | 2 +-
arch/arm/mach-at91/setup.c | 8 +-
drivers/clk/Makefile | 1 +
drivers/clk/at91/Makefile | 12 +
drivers/clk/at91/clk-main.c | 189 +++++++
drivers/clk/at91/clk-master.c | 278 ++++++++++
drivers/clk/at91/clk-peripheral.c | 407 +++++++++++++++
drivers/clk/at91/clk-pll.c | 539 ++++++++++++++++++++
drivers/clk/at91/clk-plldiv.c | 137 +++++
drivers/clk/at91/clk-programmable.c | 423 +++++++++++++++
drivers/clk/at91/clk-smd.c | 173 +++++++
drivers/clk/at91/clk-system.c | 193 +++++++
drivers/clk/at91/clk-usb.c | 400 +++++++++++++++
drivers/clk/at91/clk-utmi.c | 162 ++++++
drivers/clk/at91/pmc.c | 372 ++++++++++++++
drivers/clk/at91/pmc.h | 113 ++++
drivers/usb/gadget/atmel_usba_udc.c | 2 +-
include/dt-bindings/clk/at91.h | 28 +
.../include/mach => include/linux/clk}/at91_pmc.h | 4 +-
36 files changed, 3847 insertions(+), 20 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/at91-clock.txt
create mode 100644 drivers/clk/at91/Makefile
create mode 100644 drivers/clk/at91/clk-main.c
create mode 100644 drivers/clk/at91/clk-master.c
create mode 100644 drivers/clk/at91/clk-peripheral.c
create mode 100644 drivers/clk/at91/clk-pll.c
create mode 100644 drivers/clk/at91/clk-plldiv.c
create mode 100644 drivers/clk/at91/clk-programmable.c
create mode 100644 drivers/clk/at91/clk-smd.c
create mode 100644 drivers/clk/at91/clk-system.c
create mode 100644 drivers/clk/at91/clk-usb.c
create mode 100644 drivers/clk/at91/clk-utmi.c
create mode 100644 drivers/clk/at91/pmc.c
create mode 100644 drivers/clk/at91/pmc.h
create mode 100644 include/dt-bindings/clk/at91.h
rename {arch/arm/mach-at91/include/mach => include/linux/clk}/at91_pmc.h (98%)
--
1.7.9.5
More information about the linux-arm-kernel
mailing list