[PATCH v7] clk: add MOXA ART SoCs clock driver
Jonas Jensen
jonas.jensen at gmail.com
Wed Oct 9 10:54:42 EDT 2013
This patch adds MOXA ART SoCs clock driver support.
Signed-off-by: Jonas Jensen <jonas.jensen at gmail.com>
---
Notes:
Since last version, Adam Jaremko has been helping providing info on
the clock registers and the SoC in general. He's been looking at
bootloader sources in particular, which seem to do the same things
with slight variations.
Two separate clocks are now registered: clk_pll and clk_apb
clk_apb provides the same 48MHz frequency as before but the value is
calculated from clk_pll (192MHz) which in turn is calculated from a
fixed rate reference (12MHz).
Device drivers (watchdog, clocksource, MMC) should generally be
interested in reading apb_clk, not clk_pll.
clk_pll is obtained by multiplying the content of 0x98100030 (16)
with the reference.
The reference represent the PCB oscillator crystal, on UC-7112-LX
this has part number "12.000 KCC 20GT".
apb_clk is obtained by getting the rate of clk_pll and dividing it.
I don't think the parent clock can change rate, not without modifying
the hardware.
Changes since v6:
1. all rates calculated from a fixed rate reference clock
2. register two separate clocks, clk_pll and clk_apb
Applies to next-20130927
.../bindings/clock/moxa,moxart-clock.txt | 43 ++++++++
drivers/clk/Makefile | 1 +
drivers/clk/clk-moxart.c | 109 +++++++++++++++++++++
3 files changed, 153 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
create mode 100644 drivers/clk/clk-moxart.c
diff --git a/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
new file mode 100644
index 0000000..61fd327
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
@@ -0,0 +1,43 @@
+Device Tree Clock bindings for arch-moxart
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+MOXA ART SoCs allow to determine PLL output and APB frequencies
+by reading registers holding multiplier and divisor information.
+
+Required properties:
+- compatible : Must be "moxa,moxart-pll-clock" or "moxa,moxart-apb-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle to parent clock
+
+Optional properties for "moxa,moxart-pll-clock":
+- multiplier-reg : Should contain register offset
+- multiplier-mask : Should contain register mask
+- multiplier-shift : Should contain number of places the register is shifted to the right
+- clock-output-names : Should contain clock name
+
+Optional properties for "moxa,moxart-apb-clock":
+- divisor-reg : Should contain register offset
+- divisor-mask : Should contain register mask
+- divisor-shift : Should contain number of places the register is shifted to the right
+- clock-output-names : Should contain clock name
+
+
+For example:
+
+ clk_pll: clk_pll0 at 98100000 {
+ compatible = "moxa,moxart-pll-clock";
+ #clock-cells = <0>;
+ reg = <0x98100000 0x34>;
+ clocks = <&ref12>;
+ };
+
+ clk_apb: clk_apb at 98100000 {
+ compatible = "moxa,moxart-apb-clock";
+ #clock-cells = <0>;
+ reg = <0x98100000 0x34>;
+ clocks = <&pll0>;
+ };
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 7b11106..4c8d857 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-composite.o
# SoCs specific
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
+obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o
obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o
diff --git a/drivers/clk/clk-moxart.c b/drivers/clk/clk-moxart.c
new file mode 100644
index 0000000..18b337a
--- /dev/null
+++ b/drivers/clk/clk-moxart.c
@@ -0,0 +1,109 @@
+/*
+ * MOXA ART SoCs clock driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen at gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/clkdev.h>
+
+void __init moxart_of_pll_clk_init(struct device_node *node)
+{
+ static void __iomem *base;
+ struct clk *clk, *ref_clk;
+ unsigned long rate;
+ unsigned int mul, reg_offset = 0x30, reg_mask = 0x3f, reg_shift = 3;
+ const char *name = node->name;
+
+ of_property_read_u32(node, "multiplier-reg", ®_offset);
+ of_property_read_u32(node, "multiplier-mask", ®_mask);
+ of_property_read_u32(node, "multiplier-shift", ®_shift);
+ of_property_read_string(node, "clock-output-names", &name);
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("%s: of_iomap failed\n", node->full_name);
+ return;
+ }
+
+ mul = (readl(base + reg_offset) >> reg_shift) & reg_mask;
+ iounmap(base);
+
+ ref_clk = of_clk_get(node, 0);
+ if (IS_ERR(ref_clk)) {
+ pr_err("%s: of_clk_get failed\n", node->full_name);
+ return;
+ }
+
+ rate = (mul * clk_get_rate(ref_clk));
+
+ clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+ clk_register_clkdev(clk, NULL, name);
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+CLK_OF_DECLARE(moxart_pll_clock, "moxa,moxart-pll-clock",
+ moxart_of_pll_clk_init);
+
+void __init moxart_of_apb_clk_init(struct device_node *node)
+{
+ static void __iomem *base;
+ struct clk *clk, *pll_clk;
+ unsigned long rate;
+ unsigned int div, val, reg_offset = 0xc, reg_mask = 0x7, reg_shift = 4;
+ const char *name = node->name;
+
+ of_property_read_u32(node, "divisor-reg", ®_offset);
+ of_property_read_u32(node, "divisor-mask", ®_mask);
+ of_property_read_u32(node, "divisor-shift", ®_shift);
+ of_property_read_string(node, "clock-output-names", &name);
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("%s: of_iomap failed\n", node->full_name);
+ return;
+ }
+
+ val = (readl(base + reg_offset) >> reg_shift) & reg_mask;
+ iounmap(base);
+
+ switch (val) {
+ case 1:
+ div = 3;
+ break;
+ case 2:
+ div = 4;
+ break;
+ case 3:
+ div = 6;
+ break;
+ case 4:
+ div = 8;
+ break;
+ default:
+ div = 2;
+ break;
+ }
+
+ pll_clk = of_clk_get(node, 0);
+ if (IS_ERR(pll_clk)) {
+ pr_err("%s: of_clk_get failed\n", node->full_name);
+ return;
+ }
+
+ rate = clk_get_rate(pll_clk) / (div * 2);
+
+ clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+ clk_register_clkdev(clk, NULL, name);
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+CLK_OF_DECLARE(moxart_apb_clock, "moxa,moxart-apb-clock",
+ moxart_of_apb_clk_init);
+
--
1.8.2.1
More information about the linux-arm-kernel
mailing list