[PATCH 1/3] ARM: OMAP4: use CLK_SET_RATE_PARENT for dss_dss_clk

Tero Kristo t-kristo at ti.com
Wed Oct 9 09:22:07 EDT 2013


On 10/09/2013 04:12 PM, Tomi Valkeinen wrote:
> Set CLK_SET_RATE_PARENT flag for dss_dss_clk so that the DSS's fclk can
> be configured without the need to get the parent of the fclk.

I wouldn't touch this file right now, as we are trying to move the clock 
data over to DT. Legacy boot support probably requires to do this 
update, but I would rather wait a bit and do the modifications to both 
DT clock data and this file in the same patch. Same applies for other 
patches also.

-Tero

>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
> ---
>   arch/arm/mach-omap2/cclock44xx_data.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
> index b237950..ec0dc0b 100644
> --- a/arch/arm/mach-omap2/cclock44xx_data.c
> +++ b/arch/arm/mach-omap2/cclock44xx_data.c
> @@ -830,7 +830,8 @@ DEFINE_CLK_GATE(dss_tv_clk, "extalt_clkin_ck", &extalt_clkin_ck, 0x0,
>   		OMAP4430_CM_DSS_DSS_CLKCTRL,
>   		OMAP4430_OPTFCLKEN_TV_CLK_SHIFT, 0x0, NULL);
>
> -DEFINE_CLK_GATE(dss_dss_clk, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck, 0x0,
> +DEFINE_CLK_GATE(dss_dss_clk, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck,
> +		CLK_SET_RATE_PARENT,
>   		OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_OPTFCLKEN_DSSCLK_SHIFT,
>   		0x0, NULL);
>
>




More information about the linux-arm-kernel mailing list