[PATCH v3 02/19] ARM: at91: add Kconfig options for common clk support
boris brezillon
b.brezillon at overkiz.com
Wed Oct 9 05:56:35 EDT 2013
On 07/10/2013 17:12, Nicolas Ferre wrote:
> On 08/08/2013 07:02, Boris BREZILLON :
>> This patch adds the following Kconfig options to prepare the
>> transition to
>> common clk framework:
>>
>> - AT91_USE_OLD_CLK: this option is selected by every SoC which does not
>> support new at91 clks based on common clk framework (SoC which
>> does not
>> define the clock tree in its device tree).
>> This options is also selected when the user choose non dt boards
>> support
>> (new at91 clks can only be registered from a device tree definition).
>>
>> - COMMON_CLK_AT91: this option cannot be selected directly. Instead
>> it is
>
> I would have prefered to keep "AT91" as a prefix => "AT91_COMMON_CLK"
> But it is not so important.
>
Now I remember why I choose this name.
Take a look at drivers/clk/Makefile, the chip specific clks are defined
this way:
COMMON_CLK_XXX.
Do you still want to rename it ?
>> enabled if these 3 conditions are met:
>> * at least one of the selected SoCs have a PMC (Power Management
>> Controller) Unit
>> * device tree support is enabled
>> * the old at91 clk implementation is disabled (every selected SoC
>> define
>> its clks in its device tree and non dt boards support is disabled)
>>
>> - OLD_CLK_AT91: this option cannot be selected directly. Instead it is
>
> Here also.
>
I can change this one.
>> enabled if these 2 conditions are met:
>> * at least one of the selected SoCs have a PMC (Power Management
>> Controller) Unit
>> * at least one of the selected SoCs does not define its clks in its
>> device tree or non dt-boards support is enabled
>>
>> This patch selects AT91_USE_OLD_CLK in all currently supported SoCs.
>> These
>> selects will be removed after clk definitions are properly added in each
>> soc's device tree.
>> It also selects AT91_USE_OLD_CLK in all non-dt boards support.
>>
>> AT91_PMC_UNIT references are replaced by OLD_CLK_AT91, because PMC
>> Unit is
>> enabled for both old and common clk implementations, and old clk
>> implementation should not be compiled if COMMON_CLK is enabled.
>>
>> To avoid future link errors, a new stub is created for
>> at91_dt_clock_init
>> function if OLD_CLK_AT91 is disabled.
>>
>> A new check is added in dt init functions (setup.c) to prepare for SoCs
>> supporting new clk implementation. These SoCs won't setup the
>> register_clocks callback (clk registration is done using of_clk_init).
>>
>> Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
>> ---
>> arch/arm/mach-at91/Kconfig | 21 +++++++++++++++++++++
>> arch/arm/mach-at91/Kconfig.non_dt | 6 ++++++
>> arch/arm/mach-at91/Makefile | 2 +-
>> arch/arm/mach-at91/generic.h | 3 ++-
>> arch/arm/mach-at91/setup.c | 6 ++++--
>> 5 files changed, 34 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
>> index 699b71e..85b53a4 100644
>> --- a/arch/arm/mach-at91/Kconfig
>> +++ b/arch/arm/mach-at91/Kconfig
>> @@ -6,10 +6,22 @@ config HAVE_AT91_DBGU0
>> config HAVE_AT91_DBGU1
>> bool
>>
>> +config AT91_USE_OLD_CLK
>> + bool
>> +
>> config AT91_PMC_UNIT
>> bool
>> default !ARCH_AT91X40
>>
>> +config COMMON_CLK_AT91
>> + bool
>> + default AT91_PMC_UNIT && USE_OF && !AT91_USE_OLD_CLK
>> + select COMMON_CLK
>> +
>> +config OLD_CLK_AT91
>> + bool
>> + default AT91_PMC_UNIT && AT91_USE_OLD_CLK
>> +
>> config AT91_SAM9_ALT_RESET
>> bool
>> default !ARCH_AT91X40
>> @@ -65,6 +77,7 @@ config SOC_SAMA5D3
>> select SOC_SAMA5
>> select HAVE_FB_ATMEL
>> select HAVE_AT91_DBGU1
>> + select AT91_USE_OLD_CLK
>> help
>> Select this if you are using one of Atmel's SAMA5D3 family SoC.
>> This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35.
>> @@ -78,11 +91,13 @@ config SOC_AT91RM9200
>> select HAVE_AT91_DBGU0
>> select MULTI_IRQ_HANDLER
>> select SPARSE_IRQ
>> + select AT91_USE_OLD_CLK
>>
>> config SOC_AT91SAM9260
>> bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
>> select HAVE_AT91_DBGU0
>> select SOC_AT91SAM9
>> + select AT91_USE_OLD_CLK
>> help
>> Select this if you are using one of Atmel's AT91SAM9260,
>> AT91SAM9XE
>> or AT91SAM9G20 SoC.
>> @@ -92,6 +107,7 @@ config SOC_AT91SAM9261
>> select HAVE_AT91_DBGU0
>> select HAVE_FB_ATMEL
>> select SOC_AT91SAM9
>> + select AT91_USE_OLD_CLK
>> help
>> Select this if you are using one of Atmel's AT91SAM9261 or
>> AT91SAM9G10 SoC.
>>
>> @@ -100,18 +116,21 @@ config SOC_AT91SAM9263
>> select HAVE_AT91_DBGU1
>> select HAVE_FB_ATMEL
>> select SOC_AT91SAM9
>> + select AT91_USE_OLD_CLK
>>
>> config SOC_AT91SAM9RL
>> bool "AT91SAM9RL"
>> select HAVE_AT91_DBGU0
>> select HAVE_FB_ATMEL
>> select SOC_AT91SAM9
>> + select AT91_USE_OLD_CLK
>>
>> config SOC_AT91SAM9G45
>> bool "AT91SAM9G45 or AT91SAM9M10 families"
>> select HAVE_AT91_DBGU1
>> select HAVE_FB_ATMEL
>> select SOC_AT91SAM9
>> + select AT91_USE_OLD_CLK
>> help
>> Select this if you are using one of Atmel's AT91SAM9G45
>> family SoC.
>> This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and
>> AT91SAM9M11.
>> @@ -121,6 +140,7 @@ config SOC_AT91SAM9X5
>> select HAVE_AT91_DBGU0
>> select HAVE_FB_ATMEL
>> select SOC_AT91SAM9
>> + select AT91_USE_OLD_CLK
>> help
>> Select this if you are using one of Atmel's AT91SAM9x5 family
>> SoC.
>> This means that your SAM9 name finishes with a '5' (except if
>> it is
>> @@ -133,6 +153,7 @@ config SOC_AT91SAM9N12
>> select HAVE_AT91_DBGU0
>> select HAVE_FB_ATMEL
>> select SOC_AT91SAM9
>> + select AT91_USE_OLD_CLK
>> help
>> Select this if you are using Atmel's AT91SAM9N12 SoC.
>>
>> diff --git a/arch/arm/mach-at91/Kconfig.non_dt
>> b/arch/arm/mach-at91/Kconfig.non_dt
>> index ca900be..b736b57 100644
>> --- a/arch/arm/mach-at91/Kconfig.non_dt
>> +++ b/arch/arm/mach-at91/Kconfig.non_dt
>> @@ -12,26 +12,32 @@ config ARCH_AT91_NONE
>> config ARCH_AT91RM9200
>> bool "AT91RM9200"
>> select SOC_AT91RM9200
>> + select AT91_USE_OLD_CLK
>>
>> config ARCH_AT91SAM9260
>> bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
>> select SOC_AT91SAM9260
>> + select AT91_USE_OLD_CLK
>>
>> config ARCH_AT91SAM9261
>> bool "AT91SAM9261 or AT91SAM9G10"
>> select SOC_AT91SAM9261
>> + select AT91_USE_OLD_CLK
>>
>> config ARCH_AT91SAM9263
>> bool "AT91SAM9263"
>> select SOC_AT91SAM9263
>> + select AT91_USE_OLD_CLK
>>
>> config ARCH_AT91SAM9RL
>> bool "AT91SAM9RL"
>> select SOC_AT91SAM9RL
>> + select AT91_USE_OLD_CLK
>>
>> config ARCH_AT91SAM9G45
>> bool "AT91SAM9G45"
>> select SOC_AT91SAM9G45
>> + select AT91_USE_OLD_CLK
>>
>> config ARCH_AT91X40
>> bool "AT91x40"
>> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
>> index 3b0a953..8539411 100644
>> --- a/arch/arm/mach-at91/Makefile
>> +++ b/arch/arm/mach-at91/Makefile
>> @@ -7,7 +7,7 @@ obj-m :=
>> obj-n :=
>> obj- :=
>>
>> -obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
>> +obj-$(CONFIG_OLD_CLK_AT91) += clock.o
>> obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
>> obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
>> obj-$(CONFIG_AT91_SAM9_TIME) += at91sam926x_time.o
>> diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
>> index dc6e2f5..375c42e 100644
>> --- a/arch/arm/mach-at91/generic.h
>> +++ b/arch/arm/mach-at91/generic.h
>> @@ -44,11 +44,12 @@ extern void at91sam926x_pit_init(void);
>> extern void at91x40_timer_init(void);
>>
>> /* Clocks */
>> -#ifdef CONFIG_AT91_PMC_UNIT
>> +#ifdef CONFIG_OLD_CLK_AT91
>> extern int __init at91_clock_init(unsigned long main_clock);
>> extern int __init at91_dt_clock_init(void);
>> #else
>> static int inline at91_clock_init(unsigned long main_clock) {
>> return 0; }
>> +static int inline at91_dt_clock_init(void) { return 0; }
>> #endif
>> struct device;
>>
>> diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
>> index 41aa68b..06052fc 100644
>> --- a/arch/arm/mach-at91/setup.c
>> +++ b/arch/arm/mach-at91/setup.c
>> @@ -483,7 +483,8 @@ void __init at91rm9200_dt_initialize(void)
>> at91_dt_clock_init();
>>
>> /* Register the processor-specific clocks */
>> - at91_boot_soc.register_clocks();
>> + if (at91_boot_soc.register_clocks)
>> + at91_boot_soc.register_clocks();
>>
>> at91_boot_soc.init();
>> }
>> @@ -498,7 +499,8 @@ void __init at91_dt_initialize(void)
>> at91_dt_clock_init();
>>
>> /* Register the processor-specific clocks */
>> - at91_boot_soc.register_clocks();
>> + if (at91_boot_soc.register_clocks)
>> + at91_boot_soc.register_clocks();
>>
>> if (at91_boot_soc.init)
>> at91_boot_soc.init();
>>
>
>
More information about the linux-arm-kernel
mailing list