[PATCH 08/14] ARM: shmobile: Use KZM9D without reference for multiplatform

[Simon Horman]

From: Magnus Damm <damm at opensource.se>

Change the multiplatform kconfig bits for KZM9D from
CONFIG_MACH_KZM9D_REFERENCE into CONFIG_MACH_KZM9D
to match the non-multiplatform case.

Signed-off-by: Magnus Damm <damm at opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig  | 10 ++--------
 arch/arm/mach-shmobile/Makefile |  4 ++++
 2 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 6a684ff..c9c4f15 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -22,16 +22,10 @@ config ARCH_EMEV2
 
 comment "SH-Mobile Board Type"
 
-config MACH_KZM9D_REFERENCE
-	bool "KZM9D board - Reference Device Tree Implementation"
+config MACH_KZM9D
+	bool "KZM9D board"
 	depends on ARCH_EMEV2
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	---help---
-	   Use reference implementation of KZM9D board support
-	   which makes a greater use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
 
 comment "SH-Mobile System Configuration"
 endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index b3840ba..b11466d 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -55,6 +55,9 @@ obj-$(CONFIG_ARCH_R8A7740)	+= pm-r8a7740.o pm-rmobile.o
 obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
 
 # Board objects
+ifdef CONFIG_ARCH_SHMOBILE_MULTI
+obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d-reference.o
+else
 obj-$(CONFIG_MACH_APE6EVM)	+= board-ape6evm.o
 obj-$(CONFIG_MACH_APE6EVM_REFERENCE)	+= board-ape6evm-reference.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
@@ -72,6 +75,7 @@ obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d.o
 obj-$(CONFIG_MACH_KZM9D_REFERENCE)	+= board-kzm9d-reference.o
 obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o
+endif
 
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)
-- 
1.8.4