[PATCH] ARM: OMAP4/highbank: Flush L2 cache before disabling

[Tony Lindgren]

* Taras Kondratiuk <taras.kondratiuk at linaro.org> [131007 03:35]:
> Kexec disables outer cache before jumping to reboot code, but it doesn't
> flush it explicitly. Flush is done implicitly inside of l2x0_disable().
> But some SoC's override default .disable handler and don't flush cache.
> This may lead to a corrupted memory during Kexec reboot on these platforms.
> 
> This patch adds cache flush inside of OMAP4 and Highbank outer_cache.disable()
> handlers to make it consistent with default l2x0_disable().
> Also it removes redundant outer_flush_all() call just before outer_disable().

Sounds correct to me:

Acked-by: Tony Lindgren <tony at atomide.com>

> Acked-by: Rob Herring <rob.herring at calxeda.com>
> Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk at linaro.org>
> ---
> Based on v3.12-rc3
> 
> RFC v2: https://patchwork.kernel.org/patch/2990231/
>         Make the fix specific to platforms that don't use l2x0_disable().
> RFC v1: https://patchwork.kernel.org/patch/2974431/
> ---
> Cc: Will Deacon <will.deacon at arm.com>
> Cc: Russell King <linux at arm.linux.org.uk>
> Cc: Rob Herring <rob.herring at calxeda.com>
> Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
> Cc: linaro-kernel at lists.linaro.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-omap at vger.kernel.org
> ---
>  arch/arm/mach-highbank/highbank.c  |    1 +
>  arch/arm/mach-highbank/pm.c        |    1 -
>  arch/arm/mach-omap2/omap4-common.c |    1 +
>  3 files changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
> index 8e63ccd..22e6f34 100644
> --- a/arch/arm/mach-highbank/highbank.c
> +++ b/arch/arm/mach-highbank/highbank.c
> @@ -63,6 +63,7 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr)
>  
>  static void highbank_l2x0_disable(void)
>  {
> +	outer_flush_all();
>  	/* Disable PL310 L2 Cache controller */
>  	highbank_smc1(0x102, 0x0);
>  }
> diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
> index 04eddb4..9a5b8a7 100644
> --- a/arch/arm/mach-highbank/pm.c
> +++ b/arch/arm/mach-highbank/pm.c
> @@ -28,7 +28,6 @@
>  
>  static int highbank_suspend_finish(unsigned long val)
>  {
> -	outer_flush_all();
>  	outer_disable();
>  
>  	highbank_set_pwr_suspend();
> diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
> index 2840d1e..f6ccab61 100644
> --- a/arch/arm/mach-omap2/omap4-common.c
> +++ b/arch/arm/mach-omap2/omap4-common.c
> @@ -163,6 +163,7 @@ void __iomem *omap4_get_l2cache_base(void)
>  
>  static void omap4_l2x0_disable(void)
>  {
> +	outer_flush_all();
>  	/* Disable PL310 L2 Cache controller */
>  	omap_smc1(0x102, 0x0);
>  }
> -- 
> 1.7.9.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html