[PATCH 4/5] iommu/arm-smmu: Support buggy implementations where all config accesses are secure
Andreas Herrmann
andreas.herrmann at calxeda.com
Tue Oct 8 05:27:23 EDT 2013
In such a case we have to use secure aliases of some non-secure
registers.
This handling is switched on by DT property
"arm,smmu-secure-config-access" for an SMMU node.
Signed-off-by: Andreas Herrmann <andreas.herrmann at calxeda.com>
---
drivers/iommu/arm-smmu.c | 30 +++++++++++++++++++++---------
1 file changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index e2dbcbb..de74273 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -61,6 +61,15 @@
#define ARM_SMMU_GR0(smmu) ((smmu)->base)
#define ARM_SMMU_GR1(smmu) ((smmu)->base + (smmu)->pagesize)
+/*
+ * SMMU global address space with conditional offset to access secure aliases of
+ * non-secure registers (e.g. nsCR0: 0x400, nsGFSR: 0x448, nsGFSYNR0: 0x450)
+ */
+#define ARM_SMMU_GR0_NS(smmu) \
+ ((smmu)->base + \
+ (arm_smmu_has_option(smmu, SECURE_CONFIG_ACCESS) \
+ ? 0x400 : 0))
+
/* Page table bits */
#define ARM_SMMU_PTE_PAGE (((pteval_t)3) << 0)
#define ARM_SMMU_PTE_CONT (((pteval_t)1) << 52)
@@ -406,6 +415,7 @@ static LIST_HEAD(arm_smmu_devices);
enum arm_smmu_option {
ISOLATE_DEVICES = 0,
MASK_STREAM_IDS,
+ SECURE_CONFIG_ACCESS,
OPTION_MAX,
};
@@ -417,6 +427,7 @@ struct arm_smmu_option_prop {
static struct arm_smmu_option_prop arm_smmu_options [] = {
{ ISOLATE_DEVICES, "arm,smmu-isolate-devices" },
{ MASK_STREAM_IDS, "arm,smmu-mask-stream-ids" },
+ { SECURE_CONFIG_ACCESS, "arm,smmu-secure-config-access" },
{ OPTION_MAX, NULL},
};
@@ -675,16 +686,16 @@ static irqreturn_t arm_smmu_global_fault(int irq, void *dev)
{
u32 gfsr, gfsynr0, gfsynr1, gfsynr2;
struct arm_smmu_device *smmu = dev;
- void __iomem *gr0_base = ARM_SMMU_GR0(smmu);
+ void __iomem *gr0_base = ARM_SMMU_GR0_NS(smmu);
gfsr = readl_relaxed(gr0_base + ARM_SMMU_GR0_sGFSR);
- if (!gfsr)
- return IRQ_NONE;
-
gfsynr0 = readl_relaxed(gr0_base + ARM_SMMU_GR0_sGFSYNR0);
gfsynr1 = readl_relaxed(gr0_base + ARM_SMMU_GR0_sGFSYNR1);
gfsynr2 = readl_relaxed(gr0_base + ARM_SMMU_GR0_sGFSYNR2);
+ if (!gfsr)
+ return IRQ_NONE;
+
dev_err_ratelimited(smmu->dev,
"Unexpected global fault, this could be serious\n");
dev_err_ratelimited(smmu->dev,
@@ -1634,8 +1645,8 @@ static void arm_smmu_device_reset(struct arm_smmu_device *smmu)
u32 reg;
/* clear global FSR */
- reg = readl_relaxed(gr0_base + ARM_SMMU_GR0_sGFSR);
- writel(reg, gr0_base + ARM_SMMU_GR0_sGFSR);
+ reg = readl_relaxed(ARM_SMMU_GR0_NS(smmu) + ARM_SMMU_GR0_sGFSR);
+ writel(reg, ARM_SMMU_GR0_NS(smmu) + ARM_SMMU_GR0_sGFSR);
/* Mark all SMRn as invalid and all S2CRn as bypass */
for (i = 0; i < smmu->num_mapping_groups; ++i) {
@@ -1655,7 +1666,7 @@ static void arm_smmu_device_reset(struct arm_smmu_device *smmu)
writel_relaxed(0, gr0_base + ARM_SMMU_GR0_TLBIALLH);
writel_relaxed(0, gr0_base + ARM_SMMU_GR0_TLBIALLNSNH);
- reg = readl_relaxed(gr0_base + ARM_SMMU_GR0_sCR0);
+ reg = readl_relaxed(ARM_SMMU_GR0_NS(smmu) + ARM_SMMU_GR0_sCR0);
/* Enable fault reporting */
reg |= (sCR0_GFRE | sCR0_GFIE | sCR0_GCFGFRE | sCR0_GCFGFIE);
@@ -1674,7 +1685,7 @@ static void arm_smmu_device_reset(struct arm_smmu_device *smmu)
/* Push the button */
arm_smmu_tlb_sync(smmu);
- writel(reg, gr0_base + ARM_SMMU_GR0_sCR0);
+ writel(reg, ARM_SMMU_GR0_NS(smmu) + ARM_SMMU_GR0_sCR0);
}
static int arm_smmu_id_size_to_bits(int size)
@@ -2012,7 +2023,8 @@ static int arm_smmu_device_remove(struct platform_device *pdev)
free_irq(smmu->irqs[i], smmu);
/* Turn the thing off */
- writel(sCR0_CLIENTPD, ARM_SMMU_GR0(smmu) + ARM_SMMU_GR0_sCR0);
+ writel(sCR0_CLIENTPD,
+ ARM_SMMU_GR0_NS(smmu) + ARM_SMMU_GR0_sCR0);
return 0;
}
--
1.7.9.5
More information about the linux-arm-kernel
mailing list