[PATCH v3 05/19] clk: at91: add PMC main clock

[Nicolas Ferre]

On 08/08/2013 07:06, Boris BREZILLON :
> This patch adds new at91 main oscillator clock implementation using common
> clk framework.
>
> If rate is not provided during clock registration it is calculated using
> the slow clock (main clk parent in this case) rate and MCFR register.
>
> Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
> ---
>   drivers/clk/at91/Makefile   |    1 +
>   drivers/clk/at91/clk-main.c |  171 +++++++++++++++++++++++++++++++++++++++++++
>   drivers/clk/at91/pmc.c      |    5 ++
>   drivers/clk/at91/pmc.h      |    3 +
>   4 files changed, 180 insertions(+)
>   create mode 100644 drivers/clk/at91/clk-main.c
>
> diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
> index 1d4fb21..44105bd 100644
> --- a/drivers/clk/at91/Makefile
> +++ b/drivers/clk/at91/Makefile
> @@ -3,3 +3,4 @@
>   #
>
>   obj-y += pmc.o
> +obj-y += clk-main.o
> diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
> new file mode 100644
> index 0000000..68738dd
> --- /dev/null
> +++ b/drivers/clk/at91/clk-main.c
> @@ -0,0 +1,171 @@
> +/*
> + * drivers/clk/at91/clk-main.c
> + *
> + *  Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk/at91_pmc.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/io.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/sched.h>
> +#include <linux/wait.h>
> +
> +#include "pmc.h"
> +
> +#define to_clk_main(hw) container_of(hw, struct clk_main, hw)
> +struct clk_main {
> +	struct clk_hw hw;
> +	struct at91_pmc *pmc;
> +	unsigned long rate;
> +	unsigned int irq;
> +	wait_queue_head_t wait;
> +};
> +
> +static irqreturn_t clk_main_irq_handler(int irq, void *dev_id)
> +{
> +	struct clk_main *clkmain = (struct clk_main *)dev_id;
> +
> +	wake_up(&clkmain->wait);
> +	disable_irq_nosync(clkmain->irq);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int clk_main_prepare(struct clk_hw *hw)
> +{
> +	struct clk_main *clkmain = to_clk_main(hw);
> +	struct at91_pmc *pmc = clkmain->pmc;
> +
> +	while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS)) {
> +		enable_irq(clkmain->irq);
> +		wait_event(clkmain->wait,
> +			   pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS);
> +	}
> +
> +	return 0;
> +}
> +
> +static int clk_main_is_prepared(struct clk_hw *hw)
> +{
> +	struct clk_main *clkmain = to_clk_main(hw);
> +
> +	return !!(pmc_read(clkmain->pmc, AT91_PMC_SR) & AT91_PMC_MOSCS);
> +}
> +
> +static unsigned long clk_main_recalc_rate(struct clk_hw *hw,
> +					  unsigned long parent_rate)
> +{
> +	u32 tmp;
> +	struct clk_main *clkmain = to_clk_main(hw);
> +	struct at91_pmc *pmc = clkmain->pmc;
> +
> +	if (clkmain->rate)
> +		return clkmain->rate;
> +
> +	while (!((tmp = pmc_read(pmc, AT91_CKGR_MCFR)) & AT91_PMC_MAINRDY))
> +		;

I must say that I do not like this while() loop. Please implement a way 
out and a mean to release CPU when waiting...

Maybe taking a timeout example like this one:
http://lxr.free-electrons.com/source/drivers/net/ethernet/cadence/macb.c#L391

Which is actually what I leart from Wolfram during his interesting 
session @ ELC-E:
http://elinux.org/images/5/54/Elce11_sang.pdf

It is true though that we should keep this very quick to not alter boot 
time too much.

I also wonder if really checking that main clock is read makes sense. If 
we are running Linux it probably mean that at least main clock is 
already well configured by the bootloader.

And this lead to a more general remark: couldn't we simply state that 
this clock is fixed and only available for reading its status?


> +
> +	tmp &= AT91_PMC_MAINF;
> +	clkmain->rate = (tmp * parent_rate) / 16;
> +
> +	return clkmain->rate;
> +}
> +
> +static const struct clk_ops main_ops = {
> +	.prepare = clk_main_prepare,
> +	.is_prepared = clk_main_is_prepared,
> +	.recalc_rate = clk_main_recalc_rate,
> +};
> +
> +static struct clk * __init
> +at91_clk_register_main(struct at91_pmc *pmc,
> +		       unsigned int irq,
> +		       const char *name,
> +		       const char *parent_name,
> +		       unsigned long rate)
> +{
> +	int ret;
> +	struct clk_main *clkmain;
> +	struct clk *clk = NULL;
> +	struct clk_init_data init;
> +
> +	if (!pmc || !irq || !name)
> +		return ERR_PTR(-EINVAL);
> +
> +	if (!rate && !parent_name)
> +		return ERR_PTR(-EINVAL);
> +
> +	clkmain = kzalloc(sizeof(*clkmain), GFP_KERNEL);
> +	if (!clkmain)
> +		return ERR_PTR(-ENOMEM);
> +
> +	init.name = name;
> +	init.ops = &main_ops;
> +	init.parent_names = parent_name ? &parent_name : NULL;
> +	init.num_parents = parent_name ? 1 : 0;
> +	init.flags = parent_name ? 0 : CLK_IS_ROOT;
> +
> +	clkmain->hw.init = &init;
> +	clkmain->rate = rate;
> +	clkmain->pmc = pmc;
> +	clkmain->irq = irq;
> +	init_waitqueue_head(&clkmain->wait);
> +	irq_set_status_flags(clkmain->irq, IRQ_NOAUTOEN);
> +	ret = request_irq(clkmain->irq, clk_main_irq_handler,
> +			  IRQF_TRIGGER_HIGH, "clk-main", clkmain);
> +	if (ret)
> +		return ERR_PTR(ret);
> +
> +	clk = clk_register(NULL, &clkmain->hw);
> +
> +	if (IS_ERR(clk)) {
> +		free_irq(clkmain->irq, clkmain);
> +		kfree(clkmain);
> +	}
> +
> +	return clk;
> +}
> +
> +
> +
> +static void __init
> +of_at91_clk_main_setup(struct device_node *np, struct at91_pmc *pmc)
> +{
> +	struct clk *clk;
> +	unsigned int irq;
> +	const char *parent_name;
> +	const char *name = np->name;
> +	u32 rate = 0;
> +
> +	parent_name = of_clk_get_parent_name(np, 0);
> +	of_property_read_string(np, "clock-output-names", &name);
> +	of_property_read_u32(np, "clock-frequency", &rate);
> +	irq = irq_of_parse_and_map(np, 0);
> +	if (!irq)
> +		return;
> +
> +	clk = at91_clk_register_main(pmc, irq, name, parent_name, rate);
> +
> +	if (!IS_ERR(clk))
> +		return;
> +
> +	of_clk_add_provider(np, of_clk_src_simple_get, clk);

I do not understand this part: we add the provider if we have not 
registered the clock correctly?

> +}
> +
> +void __init of_at91rm9200_clk_main_setup(struct device_node *np,
> +					 struct at91_pmc *pmc)
> +{
> +	of_at91_clk_main_setup(np, pmc);
> +}
> diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
> index f6bd03d..42f0c19 100644
> --- a/drivers/clk/at91/pmc.c
> +++ b/drivers/clk/at91/pmc.c
> @@ -216,6 +216,11 @@ out_free_pmc:
>   }
>
>   static const struct of_device_id pmc_clk_ids[] __initdata = {
> +	/* Main clock */
> +	{
> +		.compatible = "atmel,at91rm9200-clk-main",
> +		.data = of_at91rm9200_clk_main_setup
> +	},
>   	{ /*sentinel*/ }
>   };
>
> diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
> index b7e8397..294e230 100644
> --- a/drivers/clk/at91/pmc.h
> +++ b/drivers/clk/at91/pmc.h
> @@ -55,4 +55,7 @@ static inline void pmc_write(struct at91_pmc *pmc, int offset, u32 value)
>   	return writel_relaxed(value, pmc->regbase + offset);
>   }
>
> +extern void __init of_at91rm9200_clk_main_setup(struct device_node *np,
> +						struct at91_pmc *pmc);
> +
>   #endif /* __PMC_H_ */
>


-- 
Nicolas Ferre