[PATCH v3 02/19] ARM: at91: add Kconfig options for common clk support
Nicolas Ferre
nicolas.ferre at atmel.com
Mon Oct 7 11:12:56 EDT 2013
On 08/08/2013 07:02, Boris BREZILLON :
> This patch adds the following Kconfig options to prepare the transition to
> common clk framework:
>
> - AT91_USE_OLD_CLK: this option is selected by every SoC which does not
> support new at91 clks based on common clk framework (SoC which does not
> define the clock tree in its device tree).
> This options is also selected when the user choose non dt boards support
> (new at91 clks can only be registered from a device tree definition).
>
> - COMMON_CLK_AT91: this option cannot be selected directly. Instead it is
I would have prefered to keep "AT91" as a prefix => "AT91_COMMON_CLK"
But it is not so important.
> enabled if these 3 conditions are met:
> * at least one of the selected SoCs have a PMC (Power Management
> Controller) Unit
> * device tree support is enabled
> * the old at91 clk implementation is disabled (every selected SoC define
> its clks in its device tree and non dt boards support is disabled)
>
> - OLD_CLK_AT91: this option cannot be selected directly. Instead it is
Here also.
> enabled if these 2 conditions are met:
> * at least one of the selected SoCs have a PMC (Power Management
> Controller) Unit
> * at least one of the selected SoCs does not define its clks in its
> device tree or non dt-boards support is enabled
>
> This patch selects AT91_USE_OLD_CLK in all currently supported SoCs. These
> selects will be removed after clk definitions are properly added in each
> soc's device tree.
> It also selects AT91_USE_OLD_CLK in all non-dt boards support.
>
> AT91_PMC_UNIT references are replaced by OLD_CLK_AT91, because PMC Unit is
> enabled for both old and common clk implementations, and old clk
> implementation should not be compiled if COMMON_CLK is enabled.
>
> To avoid future link errors, a new stub is created for at91_dt_clock_init
> function if OLD_CLK_AT91 is disabled.
>
> A new check is added in dt init functions (setup.c) to prepare for SoCs
> supporting new clk implementation. These SoCs won't setup the
> register_clocks callback (clk registration is done using of_clk_init).
>
> Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
> ---
> arch/arm/mach-at91/Kconfig | 21 +++++++++++++++++++++
> arch/arm/mach-at91/Kconfig.non_dt | 6 ++++++
> arch/arm/mach-at91/Makefile | 2 +-
> arch/arm/mach-at91/generic.h | 3 ++-
> arch/arm/mach-at91/setup.c | 6 ++++--
> 5 files changed, 34 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 699b71e..85b53a4 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -6,10 +6,22 @@ config HAVE_AT91_DBGU0
> config HAVE_AT91_DBGU1
> bool
>
> +config AT91_USE_OLD_CLK
> + bool
> +
> config AT91_PMC_UNIT
> bool
> default !ARCH_AT91X40
>
> +config COMMON_CLK_AT91
> + bool
> + default AT91_PMC_UNIT && USE_OF && !AT91_USE_OLD_CLK
> + select COMMON_CLK
> +
> +config OLD_CLK_AT91
> + bool
> + default AT91_PMC_UNIT && AT91_USE_OLD_CLK
> +
> config AT91_SAM9_ALT_RESET
> bool
> default !ARCH_AT91X40
> @@ -65,6 +77,7 @@ config SOC_SAMA5D3
> select SOC_SAMA5
> select HAVE_FB_ATMEL
> select HAVE_AT91_DBGU1
> + select AT91_USE_OLD_CLK
> help
> Select this if you are using one of Atmel's SAMA5D3 family SoC.
> This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35.
> @@ -78,11 +91,13 @@ config SOC_AT91RM9200
> select HAVE_AT91_DBGU0
> select MULTI_IRQ_HANDLER
> select SPARSE_IRQ
> + select AT91_USE_OLD_CLK
>
> config SOC_AT91SAM9260
> bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
> select HAVE_AT91_DBGU0
> select SOC_AT91SAM9
> + select AT91_USE_OLD_CLK
> help
> Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
> or AT91SAM9G20 SoC.
> @@ -92,6 +107,7 @@ config SOC_AT91SAM9261
> select HAVE_AT91_DBGU0
> select HAVE_FB_ATMEL
> select SOC_AT91SAM9
> + select AT91_USE_OLD_CLK
> help
> Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
>
> @@ -100,18 +116,21 @@ config SOC_AT91SAM9263
> select HAVE_AT91_DBGU1
> select HAVE_FB_ATMEL
> select SOC_AT91SAM9
> + select AT91_USE_OLD_CLK
>
> config SOC_AT91SAM9RL
> bool "AT91SAM9RL"
> select HAVE_AT91_DBGU0
> select HAVE_FB_ATMEL
> select SOC_AT91SAM9
> + select AT91_USE_OLD_CLK
>
> config SOC_AT91SAM9G45
> bool "AT91SAM9G45 or AT91SAM9M10 families"
> select HAVE_AT91_DBGU1
> select HAVE_FB_ATMEL
> select SOC_AT91SAM9
> + select AT91_USE_OLD_CLK
> help
> Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
> This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
> @@ -121,6 +140,7 @@ config SOC_AT91SAM9X5
> select HAVE_AT91_DBGU0
> select HAVE_FB_ATMEL
> select SOC_AT91SAM9
> + select AT91_USE_OLD_CLK
> help
> Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
> This means that your SAM9 name finishes with a '5' (except if it is
> @@ -133,6 +153,7 @@ config SOC_AT91SAM9N12
> select HAVE_AT91_DBGU0
> select HAVE_FB_ATMEL
> select SOC_AT91SAM9
> + select AT91_USE_OLD_CLK
> help
> Select this if you are using Atmel's AT91SAM9N12 SoC.
>
> diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
> index ca900be..b736b57 100644
> --- a/arch/arm/mach-at91/Kconfig.non_dt
> +++ b/arch/arm/mach-at91/Kconfig.non_dt
> @@ -12,26 +12,32 @@ config ARCH_AT91_NONE
> config ARCH_AT91RM9200
> bool "AT91RM9200"
> select SOC_AT91RM9200
> + select AT91_USE_OLD_CLK
>
> config ARCH_AT91SAM9260
> bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
> select SOC_AT91SAM9260
> + select AT91_USE_OLD_CLK
>
> config ARCH_AT91SAM9261
> bool "AT91SAM9261 or AT91SAM9G10"
> select SOC_AT91SAM9261
> + select AT91_USE_OLD_CLK
>
> config ARCH_AT91SAM9263
> bool "AT91SAM9263"
> select SOC_AT91SAM9263
> + select AT91_USE_OLD_CLK
>
> config ARCH_AT91SAM9RL
> bool "AT91SAM9RL"
> select SOC_AT91SAM9RL
> + select AT91_USE_OLD_CLK
>
> config ARCH_AT91SAM9G45
> bool "AT91SAM9G45"
> select SOC_AT91SAM9G45
> + select AT91_USE_OLD_CLK
>
> config ARCH_AT91X40
> bool "AT91x40"
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index 3b0a953..8539411 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -7,7 +7,7 @@ obj-m :=
> obj-n :=
> obj- :=
>
> -obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
> +obj-$(CONFIG_OLD_CLK_AT91) += clock.o
> obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
> obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
> obj-$(CONFIG_AT91_SAM9_TIME) += at91sam926x_time.o
> diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
> index dc6e2f5..375c42e 100644
> --- a/arch/arm/mach-at91/generic.h
> +++ b/arch/arm/mach-at91/generic.h
> @@ -44,11 +44,12 @@ extern void at91sam926x_pit_init(void);
> extern void at91x40_timer_init(void);
>
> /* Clocks */
> -#ifdef CONFIG_AT91_PMC_UNIT
> +#ifdef CONFIG_OLD_CLK_AT91
> extern int __init at91_clock_init(unsigned long main_clock);
> extern int __init at91_dt_clock_init(void);
> #else
> static int inline at91_clock_init(unsigned long main_clock) { return 0; }
> +static int inline at91_dt_clock_init(void) { return 0; }
> #endif
> struct device;
>
> diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
> index 41aa68b..06052fc 100644
> --- a/arch/arm/mach-at91/setup.c
> +++ b/arch/arm/mach-at91/setup.c
> @@ -483,7 +483,8 @@ void __init at91rm9200_dt_initialize(void)
> at91_dt_clock_init();
>
> /* Register the processor-specific clocks */
> - at91_boot_soc.register_clocks();
> + if (at91_boot_soc.register_clocks)
> + at91_boot_soc.register_clocks();
>
> at91_boot_soc.init();
> }
> @@ -498,7 +499,8 @@ void __init at91_dt_initialize(void)
> at91_dt_clock_init();
>
> /* Register the processor-specific clocks */
> - at91_boot_soc.register_clocks();
> + if (at91_boot_soc.register_clocks)
> + at91_boot_soc.register_clocks();
>
> if (at91_boot_soc.init)
> at91_boot_soc.init();
>
--
Nicolas Ferre
More information about the linux-arm-kernel
mailing list