[PATCH v8 7/8] ARM: dts: omap4: update omap-control-usb nodes
Roger Quadros
rogerq at ti.com
Thu Oct 3 11:12:36 EDT 2013
Split otghs_ctrl and USB2 PHY power-down into separate
omap-control-usb nodes. Get rid of "ti,type" property.
Also get rid of "ti,has-mailbox" property from usb_otg_hs
node and provide the ctrl-module phandle.
CC: Benoit Cousson <bcousson at baylibre.com>
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
arch/arm/boot/dts/omap4.dtsi | 20 ++++++++++++--------
1 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 1e8e2fe..ea4054b 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -519,7 +519,7 @@
usb2_phy: usb2phy at 4a0ad080 {
compatible = "ti,omap-usb2";
reg = <0x4a0ad080 0x58>;
- ctrl-module = <&omap_control_usb>;
+ ctrl-module = <&omap_control_usb2phy>;
#phy-cells = <0>;
};
};
@@ -644,12 +644,16 @@
};
};
- omap_control_usb: omap-control-usb at 4a002300 {
- compatible = "ti,omap-control-usb";
- reg = <0x4a002300 0x4>,
- <0x4a00233c 0x4>;
- reg-names = "control_dev_conf", "otghs_control";
- ti,type = <1>;
+ omap_control_usb2phy: control-phy at 4a002300 {
+ compatible = "ti,control-phy-usb2";
+ reg = <0x4a002300 0x4>;
+ reg-names = "power";
+ };
+
+ omap_control_usbotg: control-phy at 4a00233c {
+ compatible = "ti,control-phy-otghs";
+ reg = <0x4a00233c 0x4>;
+ reg-names = "otghs_control";
};
usb_otg_hs: usb_otg_hs at 4a0ab000 {
@@ -664,7 +668,7 @@
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
- ti,has-mailbox;
+ ctrl-module = <&omap_control_usbotg>;
};
};
};
--
1.7.4.1
More information about the linux-arm-kernel
mailing list