[PATCH 09/10] ARM: ux500: register the tc35892 GPIO on the TVK UIB

[Linus Walleij]

The TVK1281618 UIB has a TC35892 GPIO expander on it, which has
in the past probably been confused with the GPIO expander on the
older HREF plus previous to v60, which is on an entirely different
part of the system with another I2C address. Register the expander
in the right place.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 arch/arm/boot/dts/ste-href-tvk1281618.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 89e1485..76d3ef1 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -16,5 +16,26 @@
 / {
 	soc {
 		/* Add Synaptics touch screen, TC35892 keypad etc here */
+		i2c at 80004000 {
+			tc3589x at 44 {
+				compatible = "tc3589x";
+				reg = <0x44>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
 	};
 };
-- 
1.8.3.1