[PATCH 07/20] Documentation: dt: iio: Add binding for LPS001WP

[Jonathan Cameron]

On 09/16/13 17:02, Lee Jones wrote:
> LPS001WP is a Pressure and Temperature sensor.
> 
> Cc: devicetree at vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones at linaro.org>
Hi Lee,

I'm planning to drop this set of bindings in favour of the unified ones
proposed by Lukasz Czerwinski.

Could you take a look at those and perhaps propose the additional bits and pieces
needed to ensure everything is covered by the resulting files?

Thanks,

Jonathan
> ---
>  .../devicetree/bindings/iio/pressure/lps001wp.txt   | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt b/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
> new file mode 100644
> index 0000000..45cb45c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
> @@ -0,0 +1,21 @@
> +* STMicroelectronics Pressure Sensor
> +
> +Required properties:
> +  - compatible: Should be "st,lps001wp"
> +  - reg: The I2C address of the sensor
> +
> +Optional properties:
> +  - vdd-supply: Phandle to the Vdd supply regulator
> +  - vddio-supply: Phandle to the Vdd-IO supply regulator
> +
> +Example:
> +
> +i2c at 80128000 {
> +        lps001wp at 5c {
> +                compatible = "st,lps001wp";
> +                reg = <0x5c>;
> +
> +                vdd-supply = <&ab8500_ldo_aux1_reg>;
> +                vddio-supply = <&db8500_vsmps2_reg>;
> +        };
> +};
>