[PATCH 1/2] arm: dts: socfpga: Change some types of gate-clk type to periph-clk type

[Dinh Nguyen]

Hi,

Just wondering if I can get any comments on this patch set?

Thanks,
Dinh
On Tue, 2013-09-17 at 11:31 -0500, Dinh Nguyen wrote:
> From: Dinh Nguyen <dinguyen at altera.com>
> 
> Some of the clocks that were designated gate-clk did not have a gate, so
> change those clocks to be of periph-clk type.
> 
> Signed-off-by: Dinh Nguyen <dinguyen at altera.com>
> Cc: Rob Herring <rob.herring at calxeda.com>
> Cc: Pawel Moll <pawel.moll at arm.com>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: Stephen Warren <swarren at wwwdotorg.org>
> Cc: Ian Campbell <ian.campbell at citrix.com>
> Cc: Mike Turquette <mturquette at linaro.org>
> Cc: devicetree at vger.kernel.org
> CC: linux-arm-kernel at lists.infradead.org
> ---
>  arch/arm/boot/dts/socfpga.dtsi |    7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
> index 1ee6079..acd6c3a 100644
> --- a/arch/arm/boot/dts/socfpga.dtsi
> +++ b/arch/arm/boot/dts/socfpga.dtsi
> @@ -245,14 +245,14 @@
>  
>  				mpu_periph_clk: mpu_periph_clk {
>  					#clock-cells = <0>;
> -					compatible = "altr,socfpga-gate-clk";
> +					compatible = "altr,socfpga-perip-clk";
>  					clocks = <&mpuclk>;
>  					fixed-divider = <4>;
>  					};
>  
>  				mpu_l2_ram_clk: mpu_l2_ram_clk {
>  					#clock-cells = <0>;
> -					compatible = "altr,socfpga-gate-clk";
> +					compatible = "altr,socfpga-perip-clk";
>  					clocks = <&mpuclk>;
>  					fixed-divider = <2>;
>  					};
> @@ -266,8 +266,9 @@
>  
>  				l3_main_clk: l3_main_clk {
>  					#clock-cells = <0>;
> -					compatible = "altr,socfpga-gate-clk";
> +					compatible = "altr,socfpga-perip-clk";
>  					clocks = <&mainclk>;
> +					fixed-divider = <1>;
>  					};
>  
>  				l3_mp_clk: l3_mp_clk {