[PATCH RESEND] PCI: mvebu - Support a bridge with no IO port window

[Jason Gunthorpe]

Make pcie-io-aperture and the IO port MBUS ID in ranges optional.
If not provided the bridge reports to Linux that IO space mapping is
not supported and refuses to configure an IO mbus window.

This allows both complete disable (do not specify pcie-io-aperture) and
per-port disable (do not specify a IO target ranges entry for the port)

Most PCIE devices these days do not require IO support to function,
so having an option to disable it in the driver is useful.

This depends on 'bus: mvebu-mbus: Fix optional pcie-mem/io-aperture properties'
to work properly.

Signed-off-by: Jason Gunthorpe <jgunthorpe at obsidianresearch.com>
---
 drivers/pci/host/pci-mvebu.c | 62 ++++++++++++++++++++++++++++++--------------
 1 file changed, 42 insertions(+), 20 deletions(-)

diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index f2d61f5..5ddba68 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -132,6 +132,11 @@ struct mvebu_pcie_port {
 	size_t iowin_size;
 };
 
+static inline bool mvebu_has_ioport(struct mvebu_pcie_port *port)
+{
+	return port->io_target == -1 && port->io_attr == -1;
+}
+
 static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
 {
 	return !(readl(port->base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
@@ -292,6 +297,12 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
 		return;
 	}
 
+	if (!mvebu_has_ioport(port)) {
+		dev_WARN(&port->pcie->pdev->dev,
+			 "Attempt to set IO when IO is disabled\n");
+		return;
+	}
+
 	/*
 	 * We read the PCI-to-PCI bridge emulated registers, and
 	 * calculate the base address and size of the address decoding
@@ -405,9 +416,12 @@ static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port,
 		break;
 
 	case PCI_IO_BASE:
-		*value = (bridge->secondary_status << 16 |
-			  bridge->iolimit          <<  8 |
-			  bridge->iobase);
+		if (!mvebu_has_ioport(port))
+			*value = 0;
+		else
+			*value = (bridge->secondary_status << 16 |
+				  bridge->iolimit          <<  8 |
+				  bridge->iobase);
 		break;
 
 	case PCI_MEMORY_BASE:
@@ -465,6 +479,8 @@ static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port,
 	switch (where & ~3) {
 	case PCI_COMMAND:
 		bridge->command = value & 0xffff;
+		if (!mvebu_has_ioport(port))
+			bridge->command &= ~PCI_COMMAND_IO;
 		break;
 
 	case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
@@ -630,7 +646,9 @@ static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
 	struct mvebu_pcie *pcie = sys_to_pcie(sys);
 	int i;
 
-	pci_add_resource_offset(&sys->resources, &pcie->realio, sys->io_offset);
+	if (resource_size(&pcie->realio) != 0)
+		pci_add_resource_offset(&sys->resources, &pcie->realio,
+					sys->io_offset);
 	pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
 	pci_add_resource(&sys->resources, &pcie->busn);
 
@@ -739,12 +757,17 @@ mvebu_pcie_map_registers(struct platform_device *pdev,
 #define DT_CPUADDR_TO_ATTR(cpuaddr)   (((cpuaddr) >> 48) & 0xFF)
 
 static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
-			      unsigned long type, int *tgt, int *attr)
+			      unsigned long type,
+			      unsigned int *tgt,
+			      unsigned int *attr)
 {
 	const int na = 3, ns = 2;
 	const __be32 *range;
 	int rlen, nranges, rangesz, pna, i;
 
+	*tgt = -1;
+	*attr = -1;
+
 	range = of_get_property(np, "ranges", &rlen);
 	if (!range)
 		return -EINVAL;
@@ -798,16 +821,15 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
 	}
 
 	mvebu_mbus_get_pcie_io_aperture(&pcie->io);
-	if (resource_size(&pcie->io) == 0) {
-		dev_err(&pdev->dev, "invalid I/O aperture size\n");
-		return -EINVAL;
-	}
 
-	pcie->realio.flags = pcie->io.flags;
-	pcie->realio.start = PCIBIOS_MIN_IO;
-	pcie->realio.end = min_t(resource_size_t,
-				  IO_SPACE_LIMIT,
-				  resource_size(&pcie->io));
+	if (resource_size(&pcie->io) != 0) {
+		pcie->realio.flags = pcie->io.flags;
+		pcie->realio.start = PCIBIOS_MIN_IO;
+		pcie->realio.end = min_t(resource_size_t,
+					 IO_SPACE_LIMIT,
+					 resource_size(&pcie->io));
+	} else
+		pcie->realio = pcie->io;
 
 	/* Get the bus range */
 	ret = of_pci_parse_bus_range(np, &pcie->busn);
@@ -864,12 +886,12 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
 			continue;
 		}
 
-		ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_IO,
-					 &port->io_target, &port->io_attr);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for io window\n",
-				port->port, port->lane);
-			continue;
+		if (resource_size(&pcie->io) != 0)
+			mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_IO,
+					   &port->io_target, &port->io_attr);
+		else {
+			port->io_target = -1;
+			port->io_attr = -1;
 		}
 
 		port->base = mvebu_pcie_map_registers(pdev, child, port);
-- 
1.8.1.2