[PATCHv3 5/8] ARM: mxs: dt: cfa10037: make hogpins grabbed by respective drivers

[Alexandre Belloni]

Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
---
 arch/arm/boot/dts/imx28-cfa10037.dts | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index c2ef3a3..182b99f 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -22,13 +22,19 @@
 	apb at 80000000 {
 		apbh at 80000000 {
 			pinctrl at 80018000 {
-				pinctrl-names = "default", "default";
-				pinctrl-1 = <&hog_pins_cfa10037>;
-
-				hog_pins_cfa10037: hog-10037 at 0 {
+				usb_pins_cfa10037: usb-10037 at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				mac0_pins_cfa10037: mac0-10037 at 0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
 						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
 					>;
 					fsl,drive-strength = <0>;
@@ -56,7 +62,8 @@
 		mac0: ethernet at 800f0000 {
 			phy-mode = "rmii";
 			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
+			pinctrl-0 = <&mac0_pins_a
+				&mac0_pins_cfa10037>;
 			phy-reset-gpios = <&gpio2 21 0>;
 			phy-reset-duration = <100>;
 			status = "okay";
@@ -68,6 +75,8 @@
 
 		reg_usb1_vbus: usb1_vbus {
 			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10037>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
-- 
1.8.1.2