[PATCH 03/04] ARM: shmobile: Add r8a73a4 CMT10 clock event
Magnus Damm
magnus.damm at gmail.com
Fri Jun 28 07:27:23 EDT 2013
From: Magnus Damm <damm at opensource.se>
Add clock event support for CMT1 timer channel 0
to the r8a73a4 SoC code. The CMT is used together
with a 32KHz clock in this case.
Signed-off-by: Magnus Damm <damm at opensource.se>
---
arch/arm/mach-shmobile/clock-r8a73a4.c | 4 +++-
arch/arm/mach-shmobile/setup-r8a73a4.c | 21 +++++++++++++++++++++
2 files changed, 24 insertions(+), 1 deletion(-)
--- 0001/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ work/arch/arm/mach-shmobile/clock-r8a73a4.c 2013-06-28 19:52:50.000000000 +0900
@@ -505,7 +505,7 @@ static struct clk div6_clks[DIV6_NR] = {
/* MSTP */
enum {
MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
- MSTP323, MSTP318, MSTP317, MSTP316,
+ MSTP329, MSTP323, MSTP318, MSTP317, MSTP316,
MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300,
MSTP411, MSTP410, MSTP409,
MSTP522, MSTP515,
@@ -529,6 +529,7 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 17, 0), /* IIC7 */
[MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* IIC0 */
[MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
+ [MSTP329] = SH_CLK_MSTP32(&extalr_clk, SMSTPCR3, 29, 0), /* CMT10 */
[MSTP409] = SH_CLK_MSTP32(&main_div2_clk, SMSTPCR4, 9, 0), /* IIC5 */
[MSTP410] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
[MSTP411] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
@@ -593,6 +594,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]),
CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]),
CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]),
+ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]),
CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]),
CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]),
CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]),
--- 0001/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ work/arch/arm/mach-shmobile/setup-r8a73a4.c 2013-06-28 19:50:40.000000000 +0900
@@ -23,6 +23,7 @@
#include <linux/of_platform.h>
#include <linux/platform_data/irq-renesas-irqc.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a73a4.h>
@@ -169,6 +170,25 @@ static const struct resource thermal0_re
thermal0_resources, \
ARRAY_SIZE(thermal0_resources))
+static struct sh_timer_config cmt10_platform_data = {
+ .name = "CMT10",
+ .timer_bit = 0,
+ .clockevent_rating = 80,
+};
+
+static struct resource cmt10_resources[] = {
+ DEFINE_RES_MEM(0xe6130010, 0x0c),
+ DEFINE_RES_MEM(0xe6130000, 0x04),
+ DEFINE_RES_IRQ(gic_spi(120)), /* CMT1_0 */
+};
+
+#define r8a7790_register_cmt(idx) \
+ platform_device_register_resndata(&platform_bus, "sh_cmt", \
+ idx, cmt##idx##_resources, \
+ ARRAY_SIZE(cmt##idx##_resources), \
+ &cmt##idx##_platform_data, \
+ sizeof(struct sh_timer_config))
+
void __init r8a73a4_add_standard_devices(void)
{
r8a73a4_register_scif(SCIFA0);
@@ -180,6 +200,7 @@ void __init r8a73a4_add_standard_devices
r8a73a4_register_irqc(0);
r8a73a4_register_irqc(1);
r8a73a4_register_thermal();
+ r8a7790_register_cmt(10);
}
#ifdef CONFIG_USE_OF
More information about the linux-arm-kernel
mailing list