[PATCH] arm: dts: AM43x: Add usb_otg_hs node

[George Cherian]

Adds device node for HS USB Host module for AM437x

Signed-off-by: George Cherian <george.cherian at ti.com>
---
 This patch is on top of 
 git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.11/dts

 arch/arm/boot/dts/am4372.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index ddc1df7..e4f5eb8 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -64,5 +64,24 @@
 			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
 			reg = <0x44e86000 0x40>;
 		};
+
+		usb_otg_hs1: am4372_dwc3 at 48380000 {
+			compatible = "ti,am437x-dwc3";
+			reg = <0x48380000 0x1ff>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <1>;
+			ranges;
+
+			dwc3 at 48390000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x48390000 0xcfff>;
+				interrupts = <GIC_SPI  168 IRQ_TYPE_LEVEL_HIGH>;
+				tx-fifo-resize;
+			};
+
+		};
+
 	};
 };
-- 
1.8.1.4