[PATCH 09/11] ARM: tegar: remove the limitation that Tegra114 can't support suspend

[Joseph Lo]

On Thu, 2013-06-27 at 03:40 +0800, Stephen Warren wrote:
> On 06/25/2013 03:27 AM, Joseph Lo wrote:
> > The Tegra114 can support suspend function now, removing the limitation.
> 
> OK, so this is the first point at which system suspend is enabled on
> Tegra114. However, some of the changes in earlier patches sounded like
> the might affect, or be required by, cpuidle too. Is that the case? If
> so, can you assure me that bisectability of Tegra114 cpuidle is
> maintained across this whole series?

I think you mean one of the patches I changed the init sequence of CPU
idle driver and hook the "tegra_tear_down_cpu" in tegra_init_suspend
(under pm.c). I did that was for fixing the dependence of CPU idle and
suspend driver.

Because we upstreamed the CPU idle "powered-down" support first then
system suspend. So we hook the "tegra_tear_down_cpu" in CPU idle driver.
But it would cause the system suspend function fail when disabling
CPU_IDLE. After reorganizing the sequence, the system suspend is still
working after disabling CPU_IDLE. If the PM is disabled, the CPU idle
driver still supports at least WFI state.

So this series is OK with cpuidle driver. I had tested the previous
series (already merged in the branch for 3.11) is ok for Tegra20/30 as
well.

Thanks for take care.