[PATCH 3/4] ARM: shmobile: r8a7790: don't use external clock for SCIFs

Simon Horman horms+renesas at verge.net.au
Wed Jun 26 04:53:06 EDT 2013


From: Ulrich Hecht <ulrich.hecht at gmail.com>

This is an external component and may or may not be there, while the
internal clock always works.

Signed-off-by: Ulrich Hecht <ulrich.hecht at gmail.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 896d374..6531f3d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -64,7 +64,7 @@ void __init r8a7790_pinmux_init(void)
 [index] = {						\
 	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
 	.scbrr_algo_id	= SCBRR_ALGO_2,			\
-	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
 }
 
 #define HSCIF_DATA(index, baseaddr, irq)		\
-- 
1.8.2.1




More information about the linux-arm-kernel mailing list