[PATCHv3 3/9] CLK: OMAP4: Add DPLL clock support
Tero Kristo
t-kristo at ti.com
Tue Jun 25 08:38:27 EDT 2013
The OMAP clock driver now supports DPLL clock type. This patch also
adds support for DT DPLL nodes.
Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
drivers/clk/omap/Makefile | 2 +-
drivers/clk/omap/clk.c | 1 +
drivers/clk/omap/dpll.c | 307 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 309 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/omap/dpll.c
diff --git a/drivers/clk/omap/Makefile b/drivers/clk/omap/Makefile
index 8195931..4cad480 100644
--- a/drivers/clk/omap/Makefile
+++ b/drivers/clk/omap/Makefile
@@ -1 +1 @@
-obj-y += clk.o
+obj-y += clk.o dpll.o
diff --git a/drivers/clk/omap/clk.c b/drivers/clk/omap/clk.c
index 4bf1929..1dafdaa 100644
--- a/drivers/clk/omap/clk.c
+++ b/drivers/clk/omap/clk.c
@@ -28,6 +28,7 @@ static const struct of_device_id clk_match[] = {
.data = of_fixed_factor_clk_setup, },
{.compatible = "divider-clock", .data = of_divider_clk_setup, },
{.compatible = "gate-clock", .data = of_gate_clk_setup, },
+ {.compatible = "ti,omap4-dpll-clock", .data = of_omap4_dpll_setup, },
{},
};
diff --git a/drivers/clk/omap/dpll.c b/drivers/clk/omap/dpll.c
new file mode 100644
index 0000000..183ec60
--- /dev/null
+++ b/drivers/clk/omap/dpll.c
@@ -0,0 +1,307 @@
+/*
+ * OMAP DPLL clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/log2.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/omap.h>
+
+/*
+ * DOC: basic adjustable divider clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is adjustable. clk->rate = parent->rate / divisor
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
+
+#define div_mask(d) ((1 << ((d)->width)) - 1)
+
+static const struct clk_ops dpll_m4xen_ck_ops = {
+ .enable = &omap3_noncore_dpll_enable,
+ .disable = &omap3_noncore_dpll_disable,
+ .recalc_rate = &omap4_dpll_regm4xen_recalc,
+ .round_rate = &omap4_dpll_regm4xen_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+ .get_parent = &omap2_init_dpll_parent,
+};
+
+static const struct clk_ops dpll_core_ck_ops = {
+ .recalc_rate = &omap3_dpll_recalc,
+ .get_parent = &omap2_init_dpll_parent,
+};
+
+static const struct clk_ops dpll_ck_ops = {
+ .enable = &omap3_noncore_dpll_enable,
+ .disable = &omap3_noncore_dpll_disable,
+ .recalc_rate = &omap3_dpll_recalc,
+ .round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+ .get_parent = &omap2_init_dpll_parent,
+ .init = &omap2_init_clk_clkdm,
+};
+
+static const struct clk_ops dpll_x2_ck_ops = {
+ .recalc_rate = &omap3_clkoutx2_recalc,
+};
+
+struct clk *omap_clk_register_dpll(struct device *dev, const char *name,
+ const char **parent_names, int num_parents, unsigned long flags,
+ struct dpll_data *dpll_data, const char *clkdm_name,
+ const struct clk_ops *ops)
+{
+ struct clk *clk;
+ struct clk_init_data init;
+ struct clk_hw_omap *clk_hw;
+
+ /* allocate the divider */
+ clk_hw = kzalloc(sizeof(struct clk_hw_omap), GFP_KERNEL);
+ if (!clk_hw) {
+ pr_err("%s: could not allocate clk_hw_omap\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ clk_hw->dpll_data = dpll_data;
+ clk_hw->ops = &clkhwops_omap3_dpll;
+ clk_hw->clkdm_name = clkdm_name;
+ clk_hw->hw.init = &init;
+
+ init.name = name;
+ init.ops = ops;
+ init.flags = flags;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
+ /* register the clock */
+ clk = clk_register(dev, &clk_hw->hw);
+
+ if (IS_ERR(clk))
+ kfree(clk_hw);
+ else
+ omap2_init_clk_hw_omap_clocks(clk);
+
+ return clk;
+}
+
+struct clk *omap_clk_register_dpll_x2(struct device *dev, const char *name,
+ const char *parent_name, void __iomem *reg,
+ const struct clk_ops *ops)
+{
+ struct clk *clk;
+ struct clk_init_data init;
+ struct clk_hw_omap *clk_hw;
+
+ if (!parent_name) {
+ pr_err("%s: dpll_x2 must have parent\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ clk_hw = kzalloc(sizeof(struct clk_hw_omap), GFP_KERNEL);
+ if (!clk_hw) {
+ pr_err("%s: could not allocate clk_hw_omap\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ clk_hw->ops = &clkhwops_omap4_dpllmx;
+ clk_hw->clksel_reg = reg;
+ clk_hw->hw.init = &init;
+
+ init.name = name;
+ init.ops = ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ /* register the clock */
+ clk = clk_register(dev, &clk_hw->hw);
+
+ if (IS_ERR(clk))
+ kfree(clk_hw);
+ else
+ omap2_init_clk_hw_omap_clocks(clk);
+
+ return clk;
+}
+
+#ifdef CONFIG_OF
+
+/**
+ * of_omap_dpll_setup() - Setup function for OMAP DPLL clocks
+ */
+static void __init of_omap_dpll_setup(struct device_node *node,
+ const struct clk_ops *ops)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ int num_parents;
+ const char **parent_names;
+ const char *clkdm_name = NULL;
+ struct of_phandle_args clkspec;
+ u8 dpll_flags = 0;
+ struct dpll_data *dd;
+ u32 idlest_mask = 0x1;
+ u32 enable_mask = 0x7;
+ u32 autoidle_mask = 0x7;
+ u32 mult_mask = 0x7ff << 8;
+ u32 div1_mask = 0x7f;
+ u32 max_multiplier = 2047;
+ u32 max_divider = 128;
+ u32 min_divider = 1;
+ int i;
+
+ dd = kzalloc(sizeof(struct dpll_data), GFP_KERNEL);
+ if (!dd) {
+ pr_err("%s: could not allocate dpll_data\n", __func__);
+ return;
+ }
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+
+ num_parents = of_clk_get_parent_count(node);
+ if (num_parents < 1) {
+ pr_err("%s: omap dpll %s must have parent(s)\n",
+ __func__, node->name);
+ goto cleanup;
+ }
+
+ parent_names = kzalloc(sizeof(char *) * num_parents, GFP_KERNEL);
+
+ for (i = 0; i < num_parents; i++)
+ parent_names[i] = of_clk_get_parent_name(node, i);
+
+ of_property_read_u32(node, "ti,idlest-mask", &idlest_mask);
+
+ of_property_read_u32(node, "ti,enable-mask", &enable_mask);
+
+ of_property_read_u32(node, "ti,autoidle-mask", &autoidle_mask);
+
+ clkspec.np = of_parse_phandle(node, "ti,clk-ref", 0);
+ dd->clk_ref = of_clk_get_from_provider(&clkspec);
+ if (!dd->clk_ref) {
+ pr_err("%s: ti,clk-ref for %s not found\n", __func__,
+ clk_name);
+ goto cleanup;
+ }
+
+ clkspec.np = of_parse_phandle(node, "ti,clk-bypass", 0);
+ dd->clk_bypass = of_clk_get_from_provider(&clkspec);
+ if (!dd->clk_bypass) {
+ pr_err("%s: ti,clk-bypass for %s not found\n", __func__,
+ clk_name);
+ goto cleanup;
+ }
+
+ of_property_read_string(node, "ti,clkdm-name", &clkdm_name);
+
+ dd->control_reg = of_iomap(node, 0);
+ dd->idlest_reg = of_iomap(node, 1);
+ dd->autoidle_reg = of_iomap(node, 2);
+ dd->mult_div1_reg = of_iomap(node, 3);
+
+ dd->idlest_mask = idlest_mask;
+ dd->enable_mask = enable_mask;
+ dd->autoidle_mask = autoidle_mask;
+
+ if (of_property_read_bool(node, "ti,dpll-j-type")) {
+ dd->sddiv_mask = 0xff000000;
+ mult_mask = 0xfff << 8;
+ div1_mask = 0xff;
+ max_multiplier = 4095;
+ max_divider = 256;
+ }
+
+ if (of_property_read_bool(node, "ti,dpll-regm4xen")) {
+ dd->m4xen_mask = 0x800;
+ dd->lpmode_mask = 1 << 10;
+ }
+
+ dd->mult_mask = mult_mask;
+ dd->div1_mask = div1_mask;
+ dd->max_multiplier = max_multiplier;
+ dd->max_divider = max_divider;
+ dd->min_divider = min_divider;
+
+ clk = omap_clk_register_dpll(NULL, clk_name, parent_names,
+ num_parents, dpll_flags, dd,
+ clkdm_name, ops);
+
+ if (!IS_ERR(clk))
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ return;
+
+cleanup:
+ kfree(dd);
+ return;
+}
+
+static void __init of_omap_dpll_x2_setup(struct device_node *node)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ void __iomem *reg;
+ const char *parent_name;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+
+ parent_name = of_clk_get_parent_name(node, 0);
+
+ reg = of_iomap(node, 0);
+
+ clk = omap_clk_register_dpll_x2(NULL, clk_name, parent_name,
+ reg, &dpll_x2_ck_ops);
+
+ if (!IS_ERR(clk))
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+
+__init void of_omap3_dpll_setup(struct device_node *node)
+{
+ /* XXX: to be done */
+}
+EXPORT_SYMBOL_GPL(of_omap3_dpll_setup);
+CLK_OF_DECLARE(omap3_dpll_clock, "ti,omap3-dpll-clock", of_omap3_dpll_setup);
+
+__init void of_omap4_dpll_setup(struct device_node *node)
+{
+ const struct clk_ops *ops;
+
+ ops = &dpll_ck_ops;
+
+ if (of_property_read_bool(node, "ti,dpll-regm4xen"))
+ ops = &dpll_m4xen_ck_ops;
+
+ if (of_property_read_bool(node, "ti,dpll-core"))
+ ops = &dpll_core_ck_ops;
+
+ if (of_property_read_bool(node, "ti,dpll-clk-x2")) {
+ of_omap_dpll_x2_setup(node);
+ return;
+ }
+
+ of_omap_dpll_setup(node, ops);
+}
+EXPORT_SYMBOL_GPL(of_omap4_dpll_setup);
+CLK_OF_DECLARE(omap4_dpll_clock, "ti,omap4-dpll-clock", of_omap4_dpll_setup);
+#endif
--
1.7.9.5
More information about the linux-arm-kernel
mailing list