[PATCH v5 4/7] ARM:multi_v7_defconfig: rerun savedefconfig

Srinivas KANDAGATLA srinivas.kandagatla at st.com
Tue Jun 25 07:15:41 EDT 2013


From: Srinivas Kandagatla <srinivas.kandagatla at st.com>

This patch is generated after re-running savedefconfig on top of
multi_v7_defconfig which gets rid of some of the options, as they are
now slected by mach level or other Kconfigs.

The reason to generate this patch is because, it becomes confusing when
some of these options dissapear as part of new SOC addition to
multi_v7_defconfig.
I wanted this to be in a seperate patch, as these options are not
related any of the new SOC support.

Already some discussion at:https://patchwork.kernel.org/patch/2696481

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at st.com>
---
 arch/arm/configs/multi_v7_defconfig |   29 ++++++++++++-----------------
 1 files changed, 12 insertions(+), 17 deletions(-)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 2e67a27..f2b4957 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -1,23 +1,20 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
-CONFIG_ARCH_SIRF=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_SOCFPGA=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_WM8850=y
-# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
-CONFIG_ARCH_ZYNQ=y
-CONFIG_ARM_ERRATA_754322=y
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR13XX=y
 CONFIG_MACH_SPEAR1310=y
 CONFIG_MACH_SPEAR1340=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_SIRF=y
+CONFIG_ARCH_WM8850=y
+CONFIG_ARCH_ZYNQ=y
+CONFIG_ARM_ERRATA_754322=y
 CONFIG_SMP=y
-CONFIG_ARM_ARCH_TIMER=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_HIGHPTE=y
@@ -27,25 +24,25 @@ CONFIG_NEON=y
 CONFIG_NET=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
-CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_CALXEDA_XGMAC=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=y
+CONFIG_KEYBOARD_SPEAR=y
 CONFIG_SERIO_AMBAKMI=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
-CONFIG_KEYBOARD_SPEAR=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_SIRFSOC=y
 CONFIG_SERIAL_SIRFSOC_CONSOLE=y
 CONFIG_SERIAL_VT8500=y
 CONFIG_SERIAL_VT8500_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_IPMI_HANDLER=y
 CONFIG_IPMI_SI=y
 CONFIG_I2C=y
@@ -54,7 +51,6 @@ CONFIG_I2C_SIRF=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_SIRF=y
-CONFIG_GPIO_PL061=y
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FB_WM8505=y
@@ -67,7 +63,6 @@ CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_SPEAR=y
-CONFIG_MMC_WMT=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_HIGHBANK_MC=y
@@ -75,9 +70,9 @@ CONFIG_EDAC_HIGHBANK_L2=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_VT8500=y
-CONFIG_PWM=y
-CONFIG_PWM_VT8500=y
 CONFIG_DMADEVICES=y
-CONFIG_PL330_DMA=y
-CONFIG_SIRF_DMA=y
 CONFIG_DW_DMAC=y
+CONFIG_SIRF_DMA=y
+CONFIG_PL330_DMA=y
+CONFIG_PWM=y
+CONFIG_PWM_VT8500=y
-- 
1.7.6.5




More information about the linux-arm-kernel mailing list