[PATCH V3 4/6] USB: OHCI: make ohci-spear a separate driver
Manjunath Goudar
manjunath.goudar at linaro.org
Tue Jun 25 02:23:26 EDT 2013
Separate the ST OHCI SPEAr host controller driver from ohci-hcd
host code so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
it would be nice to have in 3.11.
Signed-off-by: Manjunath Goudar <manjunath.goudar at linaro.org>
Acked-by: Alan Stern <stern at rowland.harvard.edu>
Cc: Viresh Kumar <viresh.linux at gmail.com>
Cc: Arnd Bergmann <arnd at arndb.de>
Cc: Greg KH <greg at kroah.com>
Cc: linux-usb at vger.kernel.org
V2:
-ohci_setup() removed because it is called in .reset member
of the ohci_hc_driver structure.
-debugging stuff isn't needed any more that's what removed.
V3:
No change.
---
drivers/usb/host/Kconfig | 8 +++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ohci-hcd.c | 18 ------
drivers/usb/host/ohci-spear.c | 140 +++++++++++++++++------------------------
4 files changed, 65 insertions(+), 102 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index db20e43..46c2f42 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -382,6 +382,14 @@ config USB_OHCI_HCD_OMAP1
---help---
Enables support for the OHCI controller on OMAP1/2 chips.
+config USB_OHCI_HCD_SPEAR
+ tristate "Support for ST SPEAr on-chip OHCI USB controller"
+ depends on USB_OHCI_HCD && PLAT_SPEAR
+ default y
+ ---help---
+ Enables support for the on-chip OHCI controller on
+ ST SPEAr chips.
+
config USB_OHCI_HCD_OMAP3
tristate "OHCI support for OMAP3 and later chips"
depends on (ARCH_OMAP3 || ARCH_OMAP4)
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 9f2f5f3..26cb6b3 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_USB_OHCI_HCD_PLATFORM) += ohci-platform.o
obj-$(CONFIG_USB_OHCI_EXYNOS) += ohci-exynos.o
obj-$(CONFIG_USB_OHCI_HCD_OMAP1) += ohci-omap.o
obj-$(CONFIG_USB_OHCI_HCD_OMAP3) += ohci-omap3.o
+obj-$(CONFIG_USB_OHCI_HCD_SPEAR) += ohci-spear.o
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index cad51d2..34ec156 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1212,11 +1212,6 @@ MODULE_LICENSE ("GPL");
#define OF_PLATFORM_DRIVER ohci_hcd_ppc_of_driver
#endif
-#ifdef CONFIG_PLAT_SPEAR
-#include "ohci-spear.c"
-#define SPEAR_PLATFORM_DRIVER spear_ohci_hcd_driver
-#endif
-
#ifdef CONFIG_PPC_PS3
#include "ohci-ps3.c"
#define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver
@@ -1333,19 +1328,9 @@ static int __init ohci_hcd_mod_init(void)
goto error_davinci;
#endif
-#ifdef SPEAR_PLATFORM_DRIVER
- retval = platform_driver_register(&SPEAR_PLATFORM_DRIVER);
- if (retval < 0)
- goto error_spear;
-#endif
-
return retval;
/* Error path */
-#ifdef SPEAR_PLATFORM_DRIVER
- platform_driver_unregister(&SPEAR_PLATFORM_DRIVER);
- error_spear:
-#endif
#ifdef DAVINCI_PLATFORM_DRIVER
platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER);
error_davinci:
@@ -1403,9 +1388,6 @@ module_init(ohci_hcd_mod_init);
static void __exit ohci_hcd_mod_exit(void)
{
-#ifdef SPEAR_PLATFORM_DRIVER
- platform_driver_unregister(&SPEAR_PLATFORM_DRIVER);
-#endif
#ifdef DAVINCI_PLATFORM_DRIVER
platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER);
#endif
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index cc9dd9e..31ff3fc 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -11,92 +11,37 @@
* warranty of any kind, whether express or implied.
*/
-#include <linux/signal.h>
-#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/signal.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+#define DRIVER_DESC "OHCI SPEAr driver"
+
+static const char hcd_name[] = "SPEAr-ohci";
struct spear_ohci {
- struct ohci_hcd ohci;
struct clk *clk;
};
-#define to_spear_ohci(hcd) (struct spear_ohci *)hcd_to_ohci(hcd)
-
-static void spear_start_ohci(struct spear_ohci *ohci)
-{
- clk_prepare_enable(ohci->clk);
-}
-
-static void spear_stop_ohci(struct spear_ohci *ohci)
-{
- clk_disable_unprepare(ohci->clk);
-}
-
-static int ohci_spear_start(struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- int ret;
-
- ret = ohci_init(ohci);
- if (ret < 0)
- return ret;
- ohci->regs = hcd->regs;
-
- ret = ohci_run(ohci);
- if (ret < 0) {
- dev_err(hcd->self.controller, "can't start\n");
- ohci_stop(hcd);
- return ret;
- }
-
- create_debug_files(ohci);
-
-#ifdef DEBUG
- ohci_dump(ohci, 1);
-#endif
- return 0;
-}
-
-static const struct hc_driver ohci_spear_hc_driver = {
- .description = hcd_name,
- .product_desc = "SPEAr OHCI",
- .hcd_priv_size = sizeof(struct spear_ohci),
-
- /* generic hardware linkage */
- .irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
-
- /* basic lifecycle operations */
- .start = ohci_spear_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
-
- /* managing i/o requests and associated device resources */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /* scheduling support */
- .get_frame_number = ohci_get_frame,
+#define to_spear_ohci(hcd) (struct spear_ohci *)(hcd_to_ohci(hcd)->priv)
- /* root hub support */
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-
- .start_port_reset = ohci_start_port_reset,
-};
+static struct hc_driver __read_mostly ohci_spear_hc_driver;
static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
{
const struct hc_driver *driver = &ohci_spear_hc_driver;
+ struct ohci_hcd *ohci;
struct usb_hcd *hcd = NULL;
struct clk *usbh_clk;
- struct spear_ohci *ohci_p;
+ struct spear_ohci *sohci_p;
struct resource *res;
int retval, irq;
@@ -151,16 +96,18 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
goto err_put_hcd;
}
- ohci_p = (struct spear_ohci *)hcd_to_ohci(hcd);
- ohci_p->clk = usbh_clk;
- spear_start_ohci(ohci_p);
- ohci_hcd_init(hcd_to_ohci(hcd));
+ sohci_p = to_spear_ohci(hcd);
+ sohci_p->clk = usbh_clk;
+
+ clk_prepare_enable(sohci_p->clk);
+
+ ohci = hcd_to_ohci(hcd);
retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), 0);
if (retval == 0)
return retval;
- spear_stop_ohci(ohci_p);
+ clk_disable_unprepare(sohci_p->clk);
err_put_hcd:
usb_put_hcd(hcd);
fail:
@@ -172,11 +119,11 @@ fail:
static int spear_ohci_hcd_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
- struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+ struct spear_ohci *sohci_p = to_spear_ohci(hcd);
usb_remove_hcd(hcd);
- if (ohci_p->clk)
- spear_stop_ohci(ohci_p);
+ if (sohci_p->clk)
+ clk_disable_unprepare(sohci_p->clk);
usb_put_hcd(hcd);
return 0;
@@ -188,13 +135,14 @@ static int spear_ohci_hcd_drv_suspend(struct platform_device *dev,
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+ struct spear_ohci *sohci_p = to_spear_ohci(hcd);
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
ohci->next_statechange = jiffies;
- spear_stop_ohci(ohci_p);
+ clk_disable_unprepare(sohci_p->clk);
+
return 0;
}
@@ -202,13 +150,13 @@ static int spear_ohci_hcd_drv_resume(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+ struct spear_ohci *sohci_p = to_spear_ohci(hcd);
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
ohci->next_statechange = jiffies;
- spear_start_ohci(ohci_p);
+ clk_prepare_enable(sohci_p->clk);
ohci_resume(hcd, false);
return 0;
}
@@ -234,4 +182,28 @@ static struct platform_driver spear_ohci_hcd_driver = {
},
};
+static const struct ohci_driver_overrides spear_overrides __initconst = {
+ .extra_priv_size = sizeof(struct spear_ohci),
+};
+static int __init ohci_spear_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ohci_init_driver(&ohci_spear_hc_driver, &spear_overrides);
+ return platform_driver_register(&spear_ohci_hcd_driver);
+}
+module_init(ohci_spear_init);
+
+static void __exit ohci_spear_cleanup(void)
+{
+ platform_driver_unregister(&spear_ohci_hcd_driver);
+}
+module_exit(ohci_spear_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Deepak Sikri");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:spear-ohci");
--
1.7.9.5
More information about the linux-arm-kernel
mailing list