[PATCHv3 0/3] Add support for the Nuvoton NAU7802 ADC to the cfa10049
Alexandre Belloni
alexandre.belloni at free-electrons.com
Mon Jun 24 13:24:56 EDT 2013
Hi,
This is v3 of the patchset that adds support for the 3 Nuvoton NAU7802 ADCs
present on the CFA-10049 board from Crystalfontz. The first patch adds the
driver, the next ones are adding them in the DT after switching the second i2c
bus to bitbanging following a lot of timeout issues we have on that bus.
Changes in v3:
- removed the min_conversion knob in sysfs, it is now hardcoded to 6
- added error checking in probe
- corrected error checking
- corrected possibly uninitialized vldo
- used ARRAY_SIZE(nau7802_chan_array) instead of 2
- added that vldo refers to the internal voltage regulator
Changes in v2:
- channels are now statically allocated
- no wrappers around i2c functions
- sampling_freq is a shared attribute
- setting gain is done through scale
- cosmetics changes (s/idev/indio_dev/, blank lines before returns)
- use of sign_extend32 to extend the sign
- reading scale now returns IIO_VAL_FRACTIONAL_LOG2
- no dt lookup for interrupts, this is done in of_i2c.c but that was mask due
to a bug.
what I didn't address is setting the external reference voltage through a fixed
regulator and I kept the vldo attribute to set the internal voltage reference in
the DT as Jonathan seemed to be ok with that. If anybody is using a nau7802 with
an external reference, it will still be time to add the fixed regulator. It
shouldn't be difficult but I don't have any hardware to test.
Regards,
Alexandre Belloni (1):
iio: Add Nuvoton NAU7802 ADC driver
Maxime Ripard (2):
ARM: mxs: cfa10049: Switch bus i2c1 to bitbanging
ARM: mxs: cfa10049: Add NAU7802 ADCs to the device tree
.../bindings/iio/adc/nuvoton-nau7802.txt | 18 +
arch/arm/boot/dts/imx28-cfa10049.dts | 126 +++--
drivers/iio/adc/Kconfig | 9 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/nau7802.c | 576 +++++++++++++++++++++
5 files changed, 687 insertions(+), 43 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt
create mode 100644 drivers/iio/adc/nau7802.c
--
1.8.1.2
More information about the linux-arm-kernel
mailing list