[PATCH v3 11/18] pwm: Add new pwm-samsung driver

[Kukjin Kim]

On 06/22/13 22:06, Tomasz Figa wrote:
> This patch introduces new Samsung PWM driver, which is heavily cleaned,
> multiplatform aware and supports DeviceTree based instantiation.
>
> Since on historical hardware PWM block can be shared with clocksource
> driver, a shared spinlock is used to protect access to shared registers,
> already exported from the clocksource driver.
>
> Signed-off-by: Tomasz Figa<tomasz.figa at gmail.com>
> ---
>   drivers/pwm/Makefile      |   1 +
>   drivers/pwm/pwm-samsung.c | 601 ++++++++++++++++++++++++++++++++++++++++++++++
>   2 files changed, 602 insertions(+)
>   create mode 100644 drivers/pwm/pwm-samsung.c
>
> Changes since v2:
>   - Replaced __raw_{readl,writel} with {readl,writel}.
>   - Corrected commit message.
>

[...]

> +	of_property_for_each_u32(np, "samsung,pwm-outputs", prop, cur, val) {
> +		if (val>= SAMSUNG_PWM_NUM) {
> +			pr_warning("%s: invalid channel index in samsung,pwm-outputs property\n",

Just note, checkpatch complains following, so fixed to use pr_warn() 
when I applied.

WARNING: Prefer pr_warn(... to pr_warning(...
#471: FILE: drivers/pwm/pwm-samsung.c:432:
+			pr_warning("%s: invalid channel index in samsung,pwm-outputs 
property\n",

[...]

> +
> +static struct dev_pm_ops pwm_samsung_pm_ops = {

WARNING: struct dev_pm_ops should normally be const
#622: FILE: drivers/pwm/pwm-samsung.c:583:
+static struct dev_pm_ops pwm_samsung_pm_ops = {

fixed to add const when I applied.

> +	SET_SYSTEM_SLEEP_PM_OPS(pwm_samsung_suspend, pwm_samsung_resume)
> +};
> +

Thanks,
- Kukjin