[PATCH v5 2/3] ARM: shmobile: BOCK-W: add VIN and ML86V7667 support

[Sergei Shtylyov]

From: Vladimir Barinov <vladimir.barinov at cogentembedded.com>

Add ML86V7667 platform devices on BOCK-W board, configure VIN0/1 pins, and
register VIN0/1 devices with the ML86V7667 specific platform data.

Signed-off-by: Vladimir Barinov <vladimir.barinov at cogentembedded.com>
[Sergei: some macro/comment cleanup; updated the copyrights, removed duplicate
#include, annotated all platform data as '__initdata', added a сheck for the
'sh_eth' driver being enabled before registering VIN1 due to a pin conflict,
removed superfluous semicolon after iclink[01]_ml86v7667' initializer.]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>

---
Changes since version 4:
- added a сheck for the 'sh_eth' driver being enabled before registering VIN1
  due  to a pin conflict;
- removed superfluous semicolon after iclink[01]_ml86v7667' initializer;
- resolved rejects, refreshed the patch.

Changes since version 3:
- changed the VIN platform device names to be R8A7778 specific; 
- resolved reject due to USB patch rework, refreshed the patch.

Changes since version 2:
- removed duplicate #include <linux/pinctrl/machine.h>;
- annotated all platform data as '__initdata' since they're kmemdup()'ed while
  registering the platform devices anyway;
- resolved rejects, refreshed the patch.

 arch/arm/mach-shmobile/board-bockw.c |   41 +++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

Index: renesas/arch/arm/mach-shmobile/board-bockw.c
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/board-bockw.c
+++ renesas/arch/arm/mach-shmobile/board-bockw.c
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2013  Renesas Solutions Corp.
  * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
+ * Copyright (C) 2013  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,6 +29,7 @@
 #include <linux/smsc911x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <media/soc_camera.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7778.h>
@@ -142,6 +144,25 @@ static struct sh_mmcif_plat_data sh_mmci
 
 static struct rcar_phy_platform_data usb_phy_platform_data __initdata;
 
+static struct rcar_vin_platform_data vin_platform_data __initdata = {
+	.flags	= RCAR_VIN_BT656,
+};
+
+/* In the default configuration both decoders reside on I2C bus 0 */
+#define BOCKW_CAMERA(idx)						\
+static struct i2c_board_info camera##idx##_info = {			\
+	I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)),			\
+};									\
+									\
+static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = {	\
+	.bus_id		= idx,						\
+	.i2c_adapter_id	= 0,						\
+	.board_info	= &camera##idx##_info,				\
+}
+
+BOCKW_CAMERA(0);
+BOCKW_CAMERA(1);
+
 static const struct pinctrl_map bockw_pinctrl_map[] = {
 	/* Ether */
 	PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
@@ -166,6 +187,16 @@ static const struct pinctrl_map bockw_pi
 				  "usb0", "usb0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
 				  "usb1", "usb1"),
+	/* VIN0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
+				  "vin0_clk", "vin0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
+				  "vin0_data8", "vin0"),
+	/* VIN1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
+				  "vin1_clk", "vin1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
+				  "vin1_data8", "vin1"),
 };
 
 #define FPGA	0x18200000
@@ -184,6 +215,16 @@ static void __init bockw_init(void)
 	r8a7778_add_hspi_device(0);
 	r8a7778_add_mmc_device(&sh_mmcif_plat);
 	r8a7778_add_usb_phy_device(&usb_phy_platform_data);
+	r8a7778_add_vin_device(0, &vin_platform_data);
+	/* VIN1 has a pin conflict with Ether */
+	if (!IS_ENABLED(CONFIG_SH_ETH))
+		r8a7778_add_vin_device(1, &vin_platform_data);
+	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 0,
+				      &iclink0_ml86v7667,
+				      sizeof(iclink0_ml86v7667));
+	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 1,
+				      &iclink1_ml86v7667,
+				      sizeof(iclink1_ml86v7667));
 
 	i2c_register_board_info(0, i2c0_devices,
 				ARRAY_SIZE(i2c0_devices));