[PATCH] ARM: omap5: build opp4xxx_data.c

[Nishanth Menon]

On 22:29-20130621, Arnd Bergmann wrote:
> Building OMAP5 support without this file currently results in this link error:
> 
> arch/arm/mach-omap2/built-in.o: In function `omap54xx_voltagedomains_init':
> :(.init.text+0x6b80): undefined reference to `omap446x_vdd_core_volt_data'
> :(.init.text+0x6b84): undefined reference to `omap446x_vdd_mpu_volt_data'
> :(.init.text+0x6b88): undefined reference to `omap446x_vdd_iva_volt_data'
> 
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> Cc: Kevin Hilman <khilman at deeprootsystems.com>
> Cc: Benoit Cousson <b-cousson at ti.com>
> Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
> Cc: Paul Walmsley <paul at pwsan.com>
> Cc: Tony Lindgren <tony at atomide.com>
> Cc: linux-omap at vger.kernel.org
> 
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 0520dc4..f5038f5 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -77,6 +77,7 @@ ifeq ($(CONFIG_PM_OPP),y)
>  obj-y					+= opp.o
>  obj-$(CONFIG_ARCH_OMAP3)		+= opp3xxx_data.o
>  obj-$(CONFIG_ARCH_OMAP4)		+= opp4xxx_data.o
> +obj-$(CONFIG_SOC_OMAP5)			+= opp4xxx_data.o
>  endif
>  

	/*
	 * XXX Will depend on the process, validation, and binning
	 * for the currently-running IC. Use OMAP4 data for time being.
	 */
#ifdef CONFIG_PM_OPP
	omap5_voltdm_mpu.volt_data = omap446x_vdd_mpu_volt_data;
	omap5_voltdm_mm.volt_data = omap446x_vdd_iva_volt_data;
	omap5_voltdm_core.volt_data = omap446x_vdd_core_volt_data;
#endif

Should we just remove this instead? these are obviously wrong.

-- 
Regards,
Nishanth Menon